Particulate Filtering Facepiece Respirators
Particulate Filtering Facepiece Respirators (FFRs) are designed to reduce inhalation exposure to contaminants by filtering out airborne particles. Unlike face masks, FFRs are approved by the National Institute for Occupational Safety and Health (NIOSH) and have an Assigned Protection Factor (APF) of 10. They are equipped with two straps and must display appropriate NIOSH markings on the mask itself.
Particulate FFRs are made with a multi-layer, non-woven polypropylene material and are available with or without an exhalation valve. They come in a variety of shapes, including:
- Semi-hard, molded dome or cup
- Folded or flat-fold
- Pouch or duckbill, with an extended breathing chamber
Particulate FFRs are intended for one-time use. They are not washable and therefore do not have a long life cycle. Ideally, they should be discarded when they become damaged or deformed, wet or visibly dirty, contaminated with bodily fluids, or are no longer able to form an effective seal to the face.
While particulate FFRs are NIOSH tested and certified, NIOSH does not approve KN95, KF94, or any other respiratory products that may have international certifications. Regulatory compliance details for these devices are available at the individual product level.
All NIOSH-approved particulate FFRs are classified by a two-part system to indicate the filter’s functionality. Letter designations of N, R, and P refer to oil resistance. Number designations refer to the minimum filter efficiency level.
N-Series Filters – Not Resistant to Oil
- N95 – Filters at least 95% of airborne particles
- Surgical N95 – A NIOSH-approved N95 respirator cleared by the Food and Drug Administration (FDA) for use as a surgical mask
- N99 – Filters at least 99% of airborne particles
- N100 – Filters at least 99.97% of airborne particles
R-Series Filters – Resistant to Oil
- R95 – Filters at least 95% of airborne particles
P-Series Filters – Strongly Resistant to Oil
- P95 – Filters at least 95% of airborne particles
- P99 – Filters at least 99% of airborne particles
- P100 – Filters at least 99.97% of airborne particles
- (44)
- (5)
- (7)
- (4)
- (3)
- (15)
- (48)
- (7)
- (1)
- (42)
- (1)
- (1)
- (3)
- (1)
- (5)
- (2)
- (28)
- (13)
- (2)
- (7)
- (4)
- (1)
- (6)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (5)
- (9)
- (2)
- (1)
- (3)
- (19)
- (14)
- (1)
- (3)
- (1)
Résultats de la recherche filtrée
3M™ N95 Aura™ Particulate Respirators, 9205+
Three-panel, flat-fold disposable respirators provide comfortable, reliable worker protection against non-oil based particles.
| Avec valve d'extraction | No |
|---|---|
| Type de filtre | N95 |
| Type d’embout nasal | Adjustable Nose Clip |
| Certifications (NIOSH) | NIOSH 42 CFR 84, N95 |
| Type de produit | General Purpose Particulate Respirator |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Flat-fold |
| Modèle | 9205+ |
| Stérilité | Non-sterile |
| Taille | Standard |
| Type d’attache de la sangle | Stapled Headbands |
3M™ P95 Particulate Respirators with Nuisance Level Relief
P95 general purpose particulate respirators offer nuisance level acid gas (model 8576) or organic vapor relief (model 8577).
| Avec valve d'extraction | Yes |
|---|---|
| Type de filtre | P95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Type d’embout nasal | M-nose clip |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, P95, approval number: TC-84A-1166 |
| Facteur de protection assigné (APF) | 10 |
| Matériau | Polypropylene, Polyester |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | P - Oil-Proof |
| Type de conception | Cup/Molded |
| À utiliser avec (application) | Assembly and Mechanical, Cleaning, Composite Finishing, Final Finish, Paint Preparation, Welding |
| Couleur | White |
| Matériau du nez | Aluminum |
| Taille | Standard |
| Avec joint facial | No |
| Quantité | 80/Cs. |
| Matériau de serre-tête | Polyisoprene, Polyester |
| Type d’attache de la sangle | Braided and Stapled Headbands |
3M™ VFlex™ 1804 Series N95 Healthcare Particulate Respirators and Surgical Masks
N95 surgical masks provide respiratory protection against certain airborne particles. The folded style expands for a spacious feel and the pleats help increase surface area for ease of breathing.
| Avec valve d'extraction | No |
|---|---|
| Type de filtre | Surgical N95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Certifications/Conformité | ASTM F1862 |
| Type d’embout nasal | Adjustable Nose Clip |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, N95, approval number: TC-84A-7789 |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | Healthcare Particulate Respirator and Surgical Mask |
| Matériau | Polypropylene |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | Yes |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Flat-fold |
| À utiliser avec (application) | Grinding, sanding, sweeping, bagging and other dusty or arid applications |
| Résistant aux | Fluid 80 mmHg |
| Couleur | White |
| Matériau du nez | Aluminum |
| Certifications (CSA) | Health Canada Class I Medical Device |
| Stérilité | Non-sterile |
| Quantité | 400/Cs. |
| Matériau de serre-tête | Polyisoprene |
| Type d’attache de la sangle | Stapled Headbands |
3M™ N95 Healthcare Particulate Respirators and Surgical Masks, 1860 Series
Disposable respirators provide protection against certain airborne biological particles. Fluid resistant to splash and spatter of blood and other infectious material.
| Avec valve d'extraction | No |
|---|---|
| Type de filtre | Surgical N95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Certifications/Conformité | ASTM F2101, ASTM F1862 |
| Type d’embout nasal | Adjustable Nose Clip |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, N95, approval number: TC-84A-0006 |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | Healthcare Particulate Respirator and Surgical Mask |
| Matériau | Polypropylene, Polyester |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | Yes |
| Efficacité de filtre | 99% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Cup/Molded |
| Résistant aux | Fluid 120 mmHg |
| Matériau du nez | Aluminum |
| Certifications (CSA) | Health Canada Class I Medical Device |
| Stérilité | Non-sterile |
| Matériau de serre-tête | Braided Polyisoprene |
| Durée de conservation | 5 years from date of manufacture |
| Type d’attache de la sangle | Braided and Stapled Headbands |
3M™ Aura™ Series N95 Particulate Respirators
Particulate respirators with or without Cool Flow™ valve offer a comfortable fit that conform to a wide range of face sizes.
| Type de filtre | N95 |
|---|---|
| Certifications (OSHA) | OSHA 1910.134 |
| Sans latex | Yes |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | General Purpose Particulate Respirator |
| Matériau | Polypropylene |
| Jetable | Single-use |
| Efficacité de filtre | 95% |
| Avec joint facial | No |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Flat-fold |
Medicom™ SafeMask™ Architect Pro™ N95 Surgical Respirator
The SafeMask™ Architect Pro™ N95 Surgical Respirator is a medical grade respirator providing optimal respiratory protection by filtering 95% of particulate aerosols free of oil.
| Avec valve d'extraction | No |
|---|---|
| Type de filtre | N95 |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, N95 |
| Type de produit | General Purpose Particulate Respirator |
| Jetable | Single-use |
| Stérilité | Non-sterile |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Pouch/Duckbill |
AlphaProTech Critical Cover™ PFL™ N95 Particulate Respirator
N95 particulate respirator is NIOSH approved and meets WHO/CDC recommended protection levels for many airborne contaminants.
3M™ N95 Particulate Respirator with Nuisance Level Organic Vapor Relief†
NIOSH approved respirator used for nuisance level organic vapors such as solvents, degreasers, and/or resins.
| Avec valve d'extraction | Yes |
|---|---|
| Type de filtre | N95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Soulagement des odeurs nuisibles | Organic Vapors |
| Certifications/Conformité | ASTM D2859 |
| Type d’embout nasal | Standard |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, N95, approval number: TC-84A-0454 |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | Particulate Respirator with Nuisance Organic Vapor Relief |
| Matériau | Polypropylene, Polyester |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Cup/Molded |
| À utiliser avec (application) | Assembly and mechanical, cleaning, composite finishing, foundry operations, grinding, paint preparation, petrochemical, processing of minerals, welding |
| Matériau du nez | Aluminum |
| Stérilité | Non-sterile |
| Taille | Standard |
| Quantité | 80/Cs. |
| Matériau de serre-tête | Braided Polyisoprene, Cotton/Polyester |
| Type d’attache de la sangle | Adjustable Buckle Straps |
| Code couleur | White |
3M™ N95 Particulate Welding Respirators
N95 respirators with Cool Flow™ valve are designed to provide protection for applications such as welding or soldering where metal fumes may be present.
| Avec valve d'extraction | Yes |
|---|---|
| Type de filtre | N95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Soulagement des odeurs nuisibles | None |
| Certifications/Conformité | ASTM D2859 |
| Sans latex | Yes |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | Particulate Welding Respirator |
| Matériau | Polypropylene, Polyester |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Cup/Molded |
| À utiliser avec (application) | Welding, torch cutting, soldering, brazing and working with molten metals |
| Matériau du nez | Aluminum |
| Stérilité | Non-sterile |
| Taille | Standard |
| Quantité | 80/Cs. |
| Code couleur | White |
3M™ P100 Comfort Plus 8293 Particulate Respirator
Lightweight P100 respirator is ideal for protection against oil based particles from sprays that do not also emit vapors.
3M™ N95 Comfort Plus Filtering Facepiece Respirators
Lightweight N95 particulate dust respirators are designed to help provide comfort, quality and reliable protection. Cool Flow™ exhalation valve reduces heat build up inside the respirator.
| Avec valve d'extraction | Yes |
|---|---|
| Type de filtre | N95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Sans latex | Yes |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | General Purpose Particulate Respirator |
| Matériau | Polypropylene, Polyester |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Cup/Molded |
| À utiliser avec (application) | Transportation, Construction, Mining, Oil & Gas, General Manufacturing |
| Couleur | White |
| Matériau du nez | Aluminum |
| Stérilité | Non-sterile |
| Taille | Standard |
| Matériau de serre-tête | Polyisoprene |
3M™ N95 Particulate Respirators, 8110S and 8210 Series
Lightweight disposable particulate respirators designed to provide protection of at least 95 percent filtration efficiency against certain non-oil based particles in applications such as grinding, sanding, sweeping, sawing, bagging or other dusty operations.
| Avec valve d'extraction | No |
|---|---|
| Type de filtre | N95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Type d’embout nasal | Adjustable Nose Clip |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, N95, approval number: TC-84A-0007 |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | General Purpose Particulate Respirator |
| Matériau | Polypropylene, Polyester |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Cup/Molded |
| À utiliser avec (application) | Assembly, cleaning, demolition, facility maintenance, grinding, machine operation, sanding, welding |
| Couleur | White |
| Matériau du nez | Aluminum |
| Stérilité | Non-sterile |
| Avec joint facial | No |
| Matériau de serre-tête | Thermoplastic Elastomer |
| Durée de conservation | 5 years from date of manufacture |
| Type d’attache de la sangle | Two-Strap Design |
3M™ R95 Particulate Respirators with Nuisance Level Relief
R95 general purpose particulate respirators offer nuisance level acid gas (model 8246) or organic vapor relief (model 8247).
| Avec valve d'extraction | No |
|---|---|
| Type de filtre | R95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Type d’embout nasal | Adjustable Nose Clip |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, R95, approval number: TC-84A-1350 |
| Facteur de protection assigné (APF) | 10 |
| Matériau | Polypropylene, Polyester, Carbon Filter |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | R - Somewhat Resistant to Oil |
| Type de conception | Cup/Molded |
| Matériau du nez | Aluminum |
| Stérilité | Non-sterile |
| Taille | Standard |
| Avec joint facial | No |
| Quantité | 120/Cs. |
| Matériau de serre-tête | Polyisoprene, Polyester |
| Type d’attache de la sangle | Braided Comfort Strap |
3M™ VFlex™ 9105 Series N95 Particulate Respirators
Disposable N95 particulate respirators have a unique folded design with V-shaped pleats that flex with mouth movement for easier talking and expand for ease of breathing.
| Longueur (métrique) | 54.1 cm |
|---|---|
| Avec valve d'extraction | No |
| Type de filtre | N95 |
| Certifications (OSHA) | OSHA 1910.134 |
| Type d’embout nasal | Adjustable Nose Clip |
| Sans latex | Yes |
| Certifications (NIOSH) | NIOSH 42 CFR 84, N95, approval number: TC-84A-5231 |
| Facteur de protection assigné (APF) | 10 |
| Type de produit | General Purpose Particulate Respirator |
| Matériau | Polypropylene |
| Jetable | Single-use |
| Masque chirurgical approuvé par la FDA | No |
| Efficacité de filtre | 95% |
| Type d’aérosol | N - Not Resistant to Oil |
| Type de conception | Flat-fold |
| À utiliser avec (application) | Assembly, cleaning, mechanical |
| Longueur (impériale) | 21.3 in. |
| Matériau du nez | Aluminum |
| Largeur (métrique) | 32.51 cm |
| Stérilité | Non-sterile |
| Largeur (impériale) | 12.8 in. |
| Matériau de serre-tête | Polyisoprene |
| Durée de conservation | 5 years from date of manufacture |
| Type d’attache de la sangle | Stapled Headbands |
3M™ N100 Comfort Plus 8233 Particulate Respirator
N100 particulate respirator is designed to help provide reliable protection of at least 99.97 percent filtration efficiency against certain non-oil based particles.