Chromatography Columns and Cartridges
MilliporeSigma™ Supelco™ SUPELCOSIL™ ABZ+Plus Supelguard Cartridge, 5 μm Particle Size
Offer both high deactivation and unique selectivity.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-SCX Supelguard Cartridge Kit, 5 μm Particle Size
The LC-SCX cation-exchange columns have strongly acidic propylsulfonic acid groups and are used for separating cations. Adjust pH, ionic strength, and organic modifier concentration to control retention and selectivity.
MilliporeSigma™ Supelco™ SRT™-C SEC-1000 Gel Filtration Guard Column, 5 μm Particle Size, PEEK
The bonded phase in SRT™-C SEC columns is more polar than the hydrophilic phase used in SRT™ columns, making SRT™-C columns better suited for the gel filtration analysis of more hydrophobic bioopolymers such as membrane proteins and pegylated antibodies.
MilliporeSigma™ Supelco™ Zenix™ SEC-150 Gel Filtration Guard Column, 3 μm Particle Size, Stainless Steel
Like their 5 micron siblings, 3 micron Zenix™ SEC columns feature a hydrophilic surface layer to prevent the sample from interacting with the underlying silica.
MilliporeSigma™ Supelco™ Discovery™ C8 Supelguard™ Guard Cartridge Kit, 5 μm Particle Size
Discovery™ C8 HPLC column has been used in the separation of fluoroquinolone antibiotics in tablets using reversed-phase high-performance liquid chromatography (RP-HPLC).
MilliporeSigma™ Supelco™ SUPELCOGEL™ H Guard Column, 9 μm Particle Size
SUPELCOGEL™ H Guard Column is used for the protection of SUPELCOGEL™ Ion Exclusion Columns.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-1 Supelguard Cartridge, 5 μm Particle Size
Due to a mixed retention mechanism, selectivity differences for polar groups are more pronounced than on C8 and C18 columns. C1 columns require 20-30% less organic modifier to provide retention similar to C18 columns.
MilliporeSigma™ Supelco™ SRT™-C SEC-2000 Gel Filtration Guard Column, 5 μm Particle Size, PEEK
The bonded phase in SRT™-C SEC columns is more polar than the hydrophilic phase used in SRT™ columns, making SRT™-C columns better suited for the gel filtration analysis of more hydrophobic bioopolymers such as membrane proteins and pegylated antibodies.
MilliporeSigma™ Supelco™ Zenix™-C SEC-100 Gel Filtration Guard Column, 3 μm Particle Size, Stainless Steel
The bonded phase in Zenix™-C SEC columns is more polar than the hydrophilic phase used in Zenix™ columns, making Zenix™-C columns better suited for the gel filtration analysis of more hydrophobic bioopolymers such as membrane proteins and pegylated antibodies.
MilliporeSigma™ Supelco™ Proteomix™ WCX-NP5 Weak Cation Exchange Guard Cartridge and Holder, 5 μm Particle Size, Stainless Steel
Used for the analysis or small scale purification of positively charged biopolymers including glycoprotein isoforms and mAb variants.
MilliporeSigma™ Supelco™ Discovery™ BIO Wide Pore C18 Supelguard™ Cartridge Kit, 3 μm Particle Size
Kits include one cartridge, a stand-alone holder, a piece of tubing, and 2 nuts and ferrules. Guard cartridges require holders that are sold separately.
MilliporeSigma™ Supelco™ SUPELCOGEL™ K Guard Column, 9 μm Particle Size
5 cm x 4.6 mm guard column, does not include tubing, nuts or ferrules.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-18-DB Supelguard Cartridge, 5 μm Particle Size
SUPELCOSIL™ LC-18-DB Supelguard™ Cartridges contain a SUPELCOSIL™ packing, in a 2 cm stainless steel body, enclosed by polyether ether ketone (PEEK) encapsulated stainless steel frits.
MilliporeSigma™ Supelco™ Astec™ CHIROBIOTIC™ T Chiral HPLC Guard Column Cartridge, 5 μm Particle Size
CHIROBIOTIC™ T columns utilize teicoplanin as a chiral selector.
MilliporeSigma™ Supelco™ Supelguard™ Guard Cartridge Holder - Direct-Connect
For use with Supelguard cartridge (2 cm L. x 3 to 4.6 mm I.D.)