Gas Purifiers and Traps
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (3)
- (1)
Résultats de la recherche filtrée
MilliporeSigma™ Supelco™ Supelpure™-O Oxygen/Moisture Trap
Oxygen-removing catalysts that can reduce oxygen to less than 2 ppb when the level in the incoming gas does not exceed 10 ppm
| Type | Oxygen/Moisture Trap |
|---|---|
| Gamme de produits | Supelpure |
| À utiliser avec (application) | Removing Oxygen and Water Vapor From Incoming Gas |
MilliporeSigma™ Supelco™ Supelpure™ HC Hydrocarbon Trap
The best trap available for removing hydrocarbons and other organics from carrier, fuel, air, and other gas streams
| Type | Hydrocarbon Trap |
|---|---|
| Gamme de produits | Supelpure |
| Comprend | Carbon Molecular Sieve |
| À utiliser avec (application) | Removing Hydrocarbons and Other Organics From Carrier, Fuel, Air, and Other Gas Streams |
MilliporeSigma™ Supelco™ Purge/Trap F
Specific configurations available for a variety of instruments
| Type | Purge/Trap F |
|---|---|
| À utiliser avec (application) | Industrial Hygiene |
Oxiclear™ Disposable Oxygen/Moisture Trap, Sold by MilliporeSigma™ Supelco™
Reduces oxygen to less than 1 ppm when the incoming level is below 10 ppm.
| Longueur (métrique) | 19 cm |
|---|---|
| Longueur (impériale) | 7.5 in. |
| Type | Oxygen/Moisture Trap |
| Diamètre (métrique) externe | 48 mm |
| Gamme de produits | Oxiclear |
| Diamètre (impériale) externe | 1.875 in. |
| À utiliser avec (application) | Reduces Oxygen, Removes Moisture and Organic Contaminants |
Labconco™ AtmosPure™ Re-Gen Gas Purifiers
Automatic regeneration process completed in as little as 13 hours while unattended
| Hauteur (impériale) | 21.9 in. |
|---|---|
| Type | Re-Gen Gas Purifier |
| Hauteur (métrique) | 56 cm |
| Largeur (métrique) | 38 cm |
| Matériau | Stainless Steel |
| Largeur (impériale) | 14.9 in. |
| Matériau de boîtiers | Epoxy-coated Steel |
| À utiliser avec (application) | Controlled atmosphere glove boxes |
| Type de connexion | 0.75 in. Fitting |
MilliporeSigma™ Supelco™ Purge/Trap H
Specific configurations available for a variety of instruments
| Type | Purge/Trap H |
|---|---|
| À utiliser avec (application) | Industrial Hygiene |
MilliporeSigma™ Supelco™ Purge/Trap C
Specific configurations available for a variety of instruments
| Type | Purge/Trap C |
|---|---|
| À utiliser avec (application) | Industrial Hygiene |
MilliporeSigma™ Supelco™ Purge/Trap I Vocarb™ 4000
Specific configurations available for a variety of instruments
| Type | Purge/Trap I |
|---|---|
| À utiliser avec (application) | Industrial Hygiene |
MilliporeSigma™ Supelco™ Molecular Sieve 5A Moisture Traps
Efficiently remove moisture and heavy hydrocarbons from compressed air, electrolytically produced hydrogen, house nitrogen, or other gases with high moisture or hydrocarbon content
| Type | Moisture Trap |
|---|---|
| À utiliser avec (application) | Maintaining Anhydrous Conditions Within an Apparatus |
Restek™ VICI met/sen Gas-Specific Purifier Modules
Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air.
| Longueur (métrique) | 28 cm |
|---|---|
| Longueur (impériale) | 11 in. |
| Matériau | Nickel-plated Brass |
| Diamètre (métrique) externe | 3.8 cm |
| Efficacité | 15ppb |
| Diamètre (impériale) externe | 1.5 in. |
Trajan Scientific and Medical Gas Filter - Carrier Gas
Prevent contaminants in gases from significantly impacting the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column, excessive bleed and septa degradation.
Restek™ Filter and Baseplate Kits
Single-position mounting baseplate with 0.125 in. inlet/outlet fittings (06-711-828)
| Modèle | Filter and Baseplate Kit |
|---|
| Longueur (métrique) | 25.4 cm |
|---|---|
| Longueur (impériale) | 10 in. |
| Gaz mesurés | Oxygen |
| Type | Indicating Oxygen Trap |
| Indicateur coloré | Yes |
| Matériau | Glass |
| Diamètre (métrique) externe | 3.2 cm |
| Efficacité | 0.1ppm |
| Comprend | Vespel™ sealing rings |
| Pression | 100 psi |
| Matériau de boîtiers | Polycarbonate |
| Diamètre (impériale) externe | 1.25 in. |