HPLC Guard Columns and Cartridges
MilliporeSigma™ Supelco™ SUPELCOGEL™ 8H, 8% Crosslinked HPLC Guard Column, 9 μm Particle Size
Offers excellent separation of many common samples.
MilliporeSigma™ Supelco™ Astec™ Cellulose DMP Chiral HPLC Guard Kit, 5 μm Particle Size
Guard cartridges to protect Astec™ Cellulose DMP columns
MilliporeSigma™ Supelco™ Guard Cartridge Holder for BIOshell™ Guard Column
This Guard Cartridge Holder can be used with 4.6 mm, 3.0 mm and 2.1 mm ID BIOshell™ columns.
MilliporeSigma™ Supelco™ Discovery™ C8 Supelguard™ Guard Cartridge Kit, 5 μm Particle Size
Discovery™ C8 HPLC column has been used in the separation of fluoroquinolone antibiotics in tablets using reversed-phase high-performance liquid chromatography (RP-HPLC).
MilliporeSigma™ Supelco™ SRT™-C SEC-300 Gel Filtration Guard Column, 5 μm Particle Size, Stainless Steel
The bonded phase in SRT™-C SEC columns is more polar than the hydrophilic phase used in SRT™ columns, making SRT™-C columns better suited for the gel filtration analysis of more hydrophobic bioopolymers such as membrane proteins and pegylated antibodies.
MilliporeSigma™ Supelco™ Proteomix™ WCX-NP10 Weak Cation Exchange Guard Cartridge and Holder, 10 μm Particle Size, Stainless Steel
Used for the analysis or small scale purification of positively charged biopolymers including glycoprotein isoforms and mAb variants.
TSKgel™ HHR Guard Column, 5 μm Particle Size, Sold by MilliporeSigma™ Supelco™
All TSKgel HHR-type columns are shipped in THF, which can be exchanged for a broad range of organic solvents.
MilliporeSigma™ Supelco™ Proteomix™ WAX-NP5 Weak Anion Exchange Guard Cartridge and Holder, 5 μm Particle Size, Stainless Steel
Used for the analysis or small scale purification of positively charged biopolymers including glycoprotein isoforms and mAb variants.
MilliporeSigma™ Supelco™ SUPELCOGEL™ 8Ca, 8% Crosslinked HPLC Guard Column, 9 μm Particle Size
This guard column does not include tubing, nuts or ferrules. Please order them separately.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-DP Supelguard Cartridge Kit, 5 μm Particle Size
Contains a diphenyl bonded phase, which gives greater selectivity for aromatic groups compared to alkyl-type bonded phases.
MilliporeSigma™ Supelco™ SRT™ SEC-300 Gel Filtration Guard Column, 5 μm Particle Size, PEEK
Sepax SRT™ SEC columns feature a hydrophilic surface layer that effectively shields the highly porous, five micron silica particles from interacting with your sample.
MilliporeSigma™ Supelco™ Ascentis™ Express Biphenyl Guard Column, 2.7 μm Particle Size
Ascentis™ Express 90 Å Biphenyl columns can be used for basic, acidic, or neutral compounds with alternate selectivity from C18 and is especially useful for separating peaks that elute early on C18 and other phenyl phases.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-8-DB Supelguard Cartridge Kit, 5 μm Particle Size
SUPELCOSIL™ LC-DB phases are specially deactivated for basic compounds. These columns provide less retention, better peak shape, and higher efficiency for organic bases than can be obtained on conventional reversed-phase columns.
MilliporeSigma™ Supelco™ Discovery™ BIO Wide Pore C5 Supelguard™ Cartridge, 5 μm Particle Size
Kits include one cartridge, a stand-alone holder, a piece of tubing, and 2 nuts and ferrules. Guard cartridges require holders that are sold separately. The 2.1 and 4 mm I.D. cartridges use 21150AST or 59660-U (both stand-alone) or 504254 or 55205 (both integral). The 10 mm I.D. cartridges use 567499-U. The 21.2 mm I.D. cartridges use 581392-U.
MilliporeSigma™ Supelco™ Ascentis™ Express OH5 Guard Cartridge, 2 μm Particle Size
Ascentis™ Express Guard Columns provide physical (filtration) and chemical protection for costly analytical columns without compromising the very high performance of Ascentis™ Express columns.