
Magnetic Affinity Separation Particles
- (4)
- (1)
- (2)
- (4)
- (2)
- (1)
- (2)
- (2)
- (4)
- (1)
- (1)
- (5)
- (1)
- (2)
- (6)
- (5)
- (1)
- (18)
- (2)
- (6)
- (5)
- (3)
- (3)
- (2)
- (10)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (2)
- (18)
- (3)

Type | Magnetic Stand |
---|---|
Quantité | 1 Pack |
À utiliser avec (application) | Purification with Magnetic beads |
Invitrogen™ DynaMag™-96 Bottom Magnet
Magnet pulls beads to the bottom of each well. Compatible with PCR-strips and 96-well plates (200 μL) non-skirted and half-skirted and replaces the Dynal MPC-96B.
Invitrogen™ DynaMag™-2 Magnet
The DynaMag-2 magnet combines a strong magnetic attraction for efficient separations in standard microcentrifuge tubes with a flexible and smart ergonomic design.
Invitrogen™ DynaMag™-96 Side Magnet
Designed for both automation platforms (e.g., Tecan) and manual workflows, but is compatible with PCR-strips and 96-well plates (200 μL), non-skirted and half-skirted.
Invitrogen™ Dynabeads™ Protein A/Protein G and Magnet Starter Pack
The Dynabeads Protein A/Protein G and Magnet Starter Pack combines Dynabeads Protein A and Dynabeads Protein G magnetic beads for immunoprecipitation with the magnet preferred for use with 1.5 mL microcentrifuge tubes for purchasing convenience.
Thermo Scientific™ Pierce™ Ni-NTA Magnetic Agarose Beads
Thermo Scientific™ Pierce™ Ni-NTA Magnetic Agarose Beads provide a fast, convenient method for purification of His-tagged recombinant proteins.
Type | Magnetic Agarose Bead |
---|---|
Format | Bottle |
Forme protéique | Recombinant |
Gamme de produits | Pierce™ |
Granulométrie | 30 μm |
Concentration | Slurry: 25% |
Phase stationnaire | Metal Chelate, Divalent Nickel |
Conditions d’expédition | Wet Ice |
Forme | Liquid Suspension |
Pharma Magnetic Stand-96
The Magnetic Stand-96 is designed for paramagnetic bead precipitation from standard 96-well, U-bottom microplates and 0.2 mL PCR plates with no additional accessories.
Invitrogen™ Magnetic Stand-96
The stand has clear polyacryl base in standard SBS 96-well microplate footprint and uses 24 extremely strong permanent magnets for fast, easy magnetic separation in little as 30 seconds.
Invitrogen™ DynaMag™- Spin Magnet
DynaMag-Spin magnet is optimized for efficient magnetic separation of all types of Dynabeads (range 1–4.5 μm in diameter) in small sample volumes (1.5 mL) in microcentrifuge tubes.
Invitrogen™ Single Place Magnetic Stand (for one 1.5 mL tube)
Accommodates one 1.5 mL microfuge tube.
Invitrogen™ 50 mL Tube Magnetic Separator
Provides effective magnetic strength from neodymium magnets, which are aligned with plate wells or tubes.
Invitrogen™ DynaMag™-15 Magnet
Optimized for efficient cell isolation using all types of Dynabeads™ (range 1–4.5 μm in diameter) in standard 15 mL lab tubes.
Invitrogen™ DynaMag™-50 Magnet
The DynaMag-50 magnet combines a strong magnetic attraction for efficient separations with a flexible and ergonomic design that ensures comfortable working position.
Invitrogen™ Dynabeads™ Protein A for Immunoprecipitation
Dynabeads Protein A beads are uniform, 2.8-μm superparamagnetic beads with recombinant Protein A (∼45 kDa) covalently coupled to the surface.
Certifications/Conformité | ISO9001 and ISO13485 |
---|---|
À utiliser avec (équipement) | KingFisher™ Sample Purification System, DynaMag™ magnets |
Description | Recombinant Protein A covalently bound to Dynabeads |
Matériau | Polystyrene |
Pureté ou qualité | For Research Use Only |
Diamètre (métrique) | 2.8 μm |
Concentration | 30 mg/mL |
Uniformité | Monosized 2.8 mm (CV <5%) |
Conditions d’expédition | Ambient temperature |
À utiliser avec (application) | Immunoprecipitation |
Fonctionnalité de surface | Protein A |
Contenu et stockage | Dynabeads Protein A are supplied in PBS, pH 7.4 w/0.01% Tween-20, 0.09% NaN3 Store at 2–8°C. |
Compatibilité à haut débit | High-throughput Compatible |
Type | Superparamagnetic Beads |
Format | Beads in suspension |
Type de ligand | Protein A |
Cible | Antibodies |
Gamme de produits | Dynabeads™ |
Invitrogen™ Dynabeads™ Protein G for Immunoprecipitation
Dynabeads Protein G beads are uniform, 2.8-μm superparamagnetic beads with recombinant Protein G (∼17 kDa) covalently coupled to the surface.
Certifications/Conformité | ISO9001 and ISO13485 |
---|---|
À utiliser avec (équipement) | KingFisher™ Sample Purification System, DynaMag™ magnets |
Description | Recombinant Protein G covalently bound to Dynabeads |
Matériau | Polystyrene |
Pureté ou qualité | For Research Use Only |
Diamètre (métrique) | 2.8 μm |
Concentration | 30 mg/mL |
Uniformité | Monosized 2.8 mm (CV <5%) |
Conditions d’expédition | Ambient temperature |
À utiliser avec (application) | Immunoprecipitation |
Fonctionnalité de surface | Protein G |
Contenu et stockage | Dynabeads Protein G are supplied in PBS, pH 7.4 w/0.01% Tween-20, 0.09% NaN3 Store at 2–8°C. |
Compatibilité à haut débit | High-throughput Compatible |
Type | Superparamagnetic Beads |
Format | Beads in suspension |
Type de ligand | Protein G |
Cible | Antibodies |
Gamme de produits | Dynabeads™ |