HPLC Valve and Injector Accessories
MilliporeSigma™ Supelco™ Rheodyne™ Injector, Rheodyne™ 7725
Manual with MBB, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ Knitted Reactor Coil
For use with PHRED Reactor
MilliporeSigma™ Supelco™ Hydrocarbon Kit acc. to DIN EN 14039/ISO 16703
Kit contains:
- mineral oil standard for calibration 8 mg/ml in heptane
- alkane standard solution
- heptane
- standard solution for the determination of the retention time
- Florisil™ tubes
Thermo Scientific™ RheBuild™ Kits
Everything you need to maintain your Thermo Scientific™ Rheodyne™ valves and injectors in your HPLC system.
MilliporeSigma™ Supelco™ Rheodyne™ Model 3725i Preparative Sample Injector
Manual, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ PlatePrep 96-well Vacuum Manifold Starter kit
The PlatePrep vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.
MilliporeSigma™ Supelco™ Mobile Phase Reservoir System
This convenient system is made entirely of inert parts: glass, Tefzel, PEEK, and PTFE TFE. Includes 10 ft./3 m of 1/8 in. O.D. PTFE tubing, a PEEK bottom-of-the-bottle filter/sparger, a plug, and a 1-liter or 2-liter safety-coated bottle.
MilliporeSigma™ Supelco™ Replacement Bulb
λmax: 254 nm, For use with PHRED Reactor
MilliporeSigma™ Supelco™ OQ/PV and Installation Kit, API MS
For Mass Spectrometry
MilliporeSigma™ Supelco™ Valco™ Precision Sampling Plunger Tips
For series A, A-2, C, and D Pressure-Lok Gas syringes. For 25 μL to 250 μL syringes, factory repair only.
MilliporeSigma™ Supelco™ column Blank Kit for HPLC
Each column blank kit includes a precision-bore polished 316 stainless steel column blank, two zero dead volume external reducing unions (internal unions with 10 mm I.D. blanks) with nuts and ferrules for 1/16 in. O.D. tubing, and two 2 μm frits.
Thermo Scientific™ Rheodyne™ Replacement Rotor Seals for Injectors
Maintain performance of your Thermo Scientific™ Rheodyne™ Sample Injectors for HPLC with these replacement rotor seals.
MilliporeSigma™ Supelco™ PlatePrep 96-well Vacuum Manifold
The PlatePrep vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.