Chromatography Supplies
Acetonitrile with 0.1% Formic Acid (v/v), Optima™ LC/MS Grade
CAS: 75-05-8
Optima™ LC/MS Solvents Starter Kit, Includes 1L Acetonitrile, 1L Methanol, 1L Ipa And 1L Water Optima™ LC/MS Grade
Starter kit with reagents and amber glass bottle for development of the mobile phase for LC/MS
Thermo Scientific™ Pierce™ APTS (3-aminopropyltriethoxysilane)
Coat glass and silica surfaces to add primary amines, which can be used to crosslink and immobilize proteins and other molecules using this silylation reagent.
MilliporeSigma™ Supelco™ Three Layer Disc Septa
Feature a soft inner layer of silicone rubber sandwiched between hard outside layers
MilliporeSigma™ Supelco™ Swagelok™ Union, 200-6, Stainless Steel, 1/8 in.
Nuts and ferrules included.
Merlin Microseal™ System, Sold by MilliporeSigma™ Supelco™
Includes 1 Nut and 2 Low Pressure (1-45 psi) Septa, Fits Agilent GCs.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Long Design, 0.10-0.25 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Y GlasSeal™ Connector, Fused Silica
Quickly connect three pieces of fused silica tubing of the same or different diameters without the need for tools.
MilliporeSigma™ Supelco™ Supeltex™ M-4 Capillary Ferrule, Long Design, 0.10-0.25 mm Column I.D.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Long Design
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Swagelok™ Reducer Stainless Steel, 1/4 in., for tube 1/8 in.
Nuts and ferrules included.
MilliporeSigma™ Supelco™ Swagelok™ Connector to Male NPT Brass, 1/4 in., 1/8 in. male NPT, 400-1-2
Nuts and ferrules included.
MilliporeSigma™ Supelco™ Waters™ Fittings size 1/16 in.
Waters™ Fittings are used for connecting most HPLC columns to a 1/16 in. tubing system.
