Chromatography Supplies
Optima™ LC/MS Solvents Starter Kit, Includes 1L Acetonitrile, 1L Methanol, 1L Ipa And 1L Water Optima™ LC/MS Grade
Starter kit with reagents and amber glass bottle for development of the mobile phase for LC/MS
Acetonitrile with 0.1% Formic Acid (v/v), Optima™ LC/MS Grade
CAS: 75-05-8
Thermo Scientific™ Pierce™ Heptafluorobutyric Acid (HFBA), HPLC Grade
Bottles and ampules of 99.5%-pure HFBA (MW 214.04, CAS 375-22-4), valid for use as an ion-pairing agent in reverse-phase peptide separations (HPLC).
Thermo Scientific™ Pierce™ Heptafluorobutyric Acid (HFBA), Sequencing Grade
Bottles and ampules of 99.5%-pure HFBA (MW 214.04, CAS 375-22-4), valid for use as an ion-pairing agent in reverse-phase peptide separations (HPLC).
Merlin Microseal™ System, Sold by MilliporeSigma™ Supelco™
Includes 1 Nut and 2 Low Pressure (1-45 psi) Septa, Fits Agilent GCs.
MilliporeSigma™ Supelco™ Three Layer Disc Septa
Feature a soft inner layer of silicone rubber sandwiched between hard outside layers
Thermo Scientific™ SMART Digest™ RNase Kits
Use SMART Digest™ RNase Kits in your oligonucleotide mapping and quantitation workflows to obtain high quality analytical results.
MilliporeSigma™ Supelco™ Shortix™ Tubing Cutter
Correct fitting of a ferrule is very important in column performance.
MilliporeSigma™ Supelco™ Ombifit™ Small Bore Connector Three-way valve connector
Omnifit™ Small Bore Connectors offer the unique advantage of producing a very low dead volume connection with tubing of various diameters, through an O-ring compression system, a cone over tubing system or a void-filling cone with a standard gripper.
MilliporeSigma™ Supelco™ Merlin MicroSeal™ System (fits Agilent) 1 Nut and 2 General Purpose (3-100 psi) Septa
The Merlin MicroSeal™ System is a septum-less system that provides very long life.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Short Design, 0.32 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Flow adapter for Luer lock LC Columns, Column I.D. 2.5 cm
Flow adapters consist of 1/16 in. O.D. FEP tubing, a polyacetal body, a Viton™ O-ring seal and a 20 μm porosity HDPE bed support.
MilliporeSigma™ Supelco™ Upchurch Microtight™ Tubing Sleeves
PEEK sleeves with all Microtight™ fittings can be used to connect capillary tubing. All are 0.025 in. O.D.; normally, choose an I.D. that is 0.002-0.003 in. larger than the O.D. of the capillary tubing. Color-coded.
MilliporeSigma™ Supelco™ Swagelok™ Union, 200-6, Stainless Steel, 1/8 in.
Nuts and ferrules included.