Filter Holders and Hardware

MilliporeSigma™ EZ-Fit™ Filtration Unit

For bioburden testing of liquid samples like water, process samples, or final products

MilliporeSigma™ Glass Vacuum Filter Holder, 47mm

Includes 300mL funnel, fritted base and cap, clamp, and alignment sleeve. Glass Vacuum Filter Holders, 47mm are used in vacuum filtration of liquids to produce clarified or particulate-free filtrate or to analyze particulate or biological contamination retained on the filter surface.

Eisco™ Glass Filtration Assembly

Glass Filtration Assembly for vacuum filtration of tissue culture media, biological fluids, HPCL and other aqueous solutions.

Fisherbrand™ PVC Vacuum Manifolds

For testing multiple samples by vacuum filtration

Filtration Hardware, Accessories, and Spare Parts

Thermo Scientific™ Nalgene™ filtration hardware and accessories can be used in a wide range of applications and in conjunction with our various lines of filtration devices.

MilliporeSigma™ Filter Holder Vacuum Manifolds

Provide vacuum support for simultaneous filtration of either three or six test samples

Fisherbrand™ Vacuum Filter Holders, Silicone Rubber Stoppers

For use with Fisherbrand Vacuum Filter Holders

Synthware™ Joint Clip, Standard Taper Joint

Used to help hold together standard taper joints

Fisherbrand™ Stainless-Steel Hydrolab Manifolds

For routine microbiological filtrations

GVS ABLUO™ 13mm Syringe Filters, Non-sterile

Filter samples of all kinds of solutions, solvents, or gases quickly and efficiently. GVS ABLUO™ 13mm Syringe Filters, Non-sterile are available with a variety of membrane materials and pore sizes to meet specific filtration needs.

Synthware™ Glass Cutter

Glass cutter with diamond dusted cutting edge

MilliporeSigma™ EZ-Fit™ Manifolds

General microbiological analysis

DWK Life Sciences Kimble™ Kontes™ Filtration Assemblies: Flasks With Side Arm, No. 2 Hose connection

DWK Life Sciences Kimble Kontes Filtration Assemblies: Flasks With Side Arm, No. 2 Hose connection, Capacity: 1000mL, Connector Types: No. 2 Hose Connection, Standard Taper Joint: 8, Borosilicate Glass, Description: Filtration Flask

MilliporeSigma™ 47mm Hydrosol™ Stainless-Steel Vacuum Filter Holder

For particulate or biological contamination analysis via vacuum filtration

MilliporeSigma™ Rotary Agitator

Holds from one to four units

MilliporeSigma™ Swinnex™ Filter Holders

Ultraclean or sterilize small volumes of liquids dispensed by syringe

MilliporeSigma™ Sterifil™ 47mm Aseptic Vacuum Filter System Replacement Parts

Used for general filtration applications and filtration of samples for particulate or biological contamination analysis

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (90mm)

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (47mm)

Used for general filtration and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination

Fisherbrand™ Glass Microanalysis Vacuum Filter Holders, 47mm

Designed for use with Fisherbrand vacuum filters.

MilliporeSigma™ Base and Cap for Vacuum Filtration with Glass Frit Support

Designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration

MilliporeSigma™ 90mm Glass Vacuum Filter Holder

Vacuum filter aqueous, organic, or corrosive liquids for particulate contamination analysis

MilliporeSigma™ Stainless-Steel Pressure Filter Holders

Ultraclean or sterilize liquids or gases by pressure filtration

Fisherbrand™ Vacuum Filter Holders, Stainless Steel Support Screens

For use with Fisherbrand Vacuum Filter Holders

MilliporeSigma™ 142mm Hazardous Waste Pressure Filter System

Separates solid and liquid phases of waste samples

MilliporeSigma™ 25mm Glass Microanalysis Vacuum Filter Holder and Support

Vacuum filter small volumes for particulate or biological contamination analysis.

MilliporeSigma™ Zero-Headspace Extractor Hazardous Waste Pressure Filter System

Cannot pressurize unless completely assembled, assuring safe operation

PYREX™ 47 mm Microfiltration Glassware Replacement Parts

Replacement Parts for Corning PYREX 47mm Microfiltration Glassware Apparatus (13-645-088, sold separately)

Cytiva Whatman™ Swin-Lok™ Filter Holders

For microfiltration and ultra cleaning of small volumes of liquids

  spinner