Chromatography Supplies
Acetonitrile with 0.1% Formic Acid (v/v), Optima™ LC/MS Grade
CAS: 75-05-8
Optima™ LC/MS Solvents Starter Kit, Includes 1L Acetonitrile, 1L Methanol, 1L Ipa And 1L Water Optima™ LC/MS Grade
Starter kit with reagents and amber glass bottle for development of the mobile phase for LC/MS
Merlin Microseal™ System, Sold by MilliporeSigma™ Supelco™
Includes 1 Nut and 2 Low Pressure (1-45 psi) Septa, Fits Agilent GCs.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Long Design, 0.10-0.25 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Y GlasSeal™ Connector, Fused Silica
Quickly connect three pieces of fused silica tubing of the same or different diameters without the need for tools.
MilliporeSigma™ Supelco™ Supeltex™ M-4 Capillary Ferrule, Long Design, 0.10-0.25 mm Column I.D.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Short Design, 0.32 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Supeltex™ M-4 Capillary Ferrule, Short Design, 0.32 mm Column I.D.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Timestrip™ Indicators
Simple, visual reminders for any time driven event
MilliporeSigma™ Supelco™ Flow adapter for Luer lock LC Columns, Column I.D. 2.5 cm
Flow adapters consist of 1/16 in. O.D. FEP tubing, a polyacetal body, a Viton™ O-ring seal and a 20 μm porosity HDPE bed support.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Long Design
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Supeltex™ M-2A Reducing Ferrule, Column in 1/4 in. fitting
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Liquid chromatography Column Fittings Stopcock, Polycarbonate/Acetal Copolymer
A polycarbonate/acetal copolymer on-off control with female Luer-Lock inlet and male Luer-Lock outlet ports.
MilliporeSigma™ Supelco™ Supeltex™ M-4 Packed Column Ferrule, 1/4 in.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, General Purpose, 0.10-0.25 mm Column I.D. (2-hole)
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass.Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C