HPLC Valve and Injector Accessories

MilliporeSigma™ Supelco™ Rheodyne™ Model 7010 Injector

Number of ports: 6 and Number of positions: 2

MilliporeSigma™ Supelco™ Rheodyne™ Model 7000L Stream Switching Valve, Large Bore

Manual, Number of ports: 6 and Number of positions: 2

MilliporeSigma™ Supelco™ Low Volume Static Mixer (50 to 250 μL) Housing, In-line

MilliporeSigma™ Supelco™ Sample Loop for 9010, 9125, and 9725 Injectors, PEEK

MilliporeSigma™ Supelco™ Rheodyne™ Injector, Rheodyne™, 7725i

Internal position sensing switch, Manual, Number of ports: 6 and Number of positions: 2

MilliporeSigma™ Supelco™ column Blank Kit for HPLC

Each column blank kit includes a precision-bore polished 316 stainless steel column blank, two zero dead volume external reducing unions (internal unions with 10 mm I.D. blanks) with nuts and ferrules for 1/16 in. O.D. tubing, and two 2 μm frits.

Thermo Scientific™ Rheodyne™ Replacement Rotor Seals for Injectors  

Maintain performance of your Thermo Scientific™ Rheodyne™ Sample Injectors for HPLC with these replacement rotor seals.

MilliporeSigma™ Supelco™ SSI™ High Pressure Precolumn Filter

In-line installation. The 316 stainless steel filter disc (0.5 μm pores) is easily replaced without removing the column end fitting. For 1/16 in. tubing. Maximum operating pressure: 15,000 psi (1,054 kg/cm²).

MilliporeSigma™ Supelco™ RheBuild™ Kit

Kits include all of the tools and parts you need to repair your SupelPRO unit. The parts included are those most likely to be damaged, worn, or lost. Parts may vary, depending on valve model.

MilliporeSigma™ Supelco™ Reservoir for Filtration Apparatus 1

Replacement glass reservoir for Supelco™ mobile phase filtration apparatus 1

MilliporeSigma™ Supelco™ OPTI-SEAL Pump Seal

OPTI-SEAL pump seals are made from an inert, ultra-high molecular weight polyethylene material (UHMW-PE). Relative to conventional polytetrafluoroethylene (PTFE) seals, these seals show less particle shedding. This reduces the potential for clogged frits, resulting in the prevention of unscheduled system downtime.

MilliporeSigma™ Supelco™ Mobile Phase Filtration Apparatus 2

Connects to aspiration line

MilliporeSigma™ Supelco™ Mobile Phase Solvent Debubbler with Bracket

Gas bubbles in the mobile phase reduce pump output and cause check valves to malfunction. The mobile phase debubbler removes bubbles from the pump inlet line. Bubbles in the incoming mobile phase rise in the debubbler, displacing an equal volume of liquid from the debubbler reservoir to the pump. When necessary, simply remove the cap and refill the reservoir -- the gas-liquid interface is visible through the housing.

MilliporeSigma™ Supelco™ LC column Replacement Bed Supports

For use with flow adapter only.

MilliporeSigma™ Supelco™ TSKgel™ Hardware and Accessories