Individual HPLC Components and Accessories
MilliporeSigma™ Supelco™ Micro-Splitter Valves
Available in High and Low Pressure options
DWK Life Sciences Kimble™ Kontes™ Straight with Tip-O-Ring HI-VAC Valves
For use with Kontes Straight with Tip O-Ring
MilliporeSigma™ Supelco™ Miniature Regulator with Gauge
Reliable pressure regulation to 1 psig (0.07 kg/cm2), indicated on a 0-60 psi (4.2 kg/cm2) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum body with acetyl resin bonnet. Maximum inlet pressure: 400 psi (28.1 kg/cm2).
MilliporeSigma™ Supelco™ Precolumn Filter Direct-Connect, PEEK
Direct-connect; protects analytical and guard columns.
MilliporeSigma™ Supelco™ RheBuild™ Kit
Kits include all of the tools and parts you need to repair your SupelPRO unit. The parts included are those most likely to be damaged, worn, or lost. Parts may vary, depending on valve model.
MilliporeSigma™ Supelco™ Reservoir for Filtration Apparatus 1
Replacement glass reservoir for Supelco™ mobile phase filtration apparatus 1
MilliporeSigma™ Supelco™ OPTI-SEAL Pump Seal
OPTI-SEAL pump seals are made from an inert, ultra-high molecular weight polyethylene material (UHMW-PE). Relative to conventional polytetrafluoroethylene (PTFE) seals, these seals show less particle shedding. This reduces the potential for clogged frits, resulting in the prevention of unscheduled system downtime.
MilliporeSigma™ Supelco™ Rheodyne™ Injector, Rheodyne™ 7725
Manual with MBB, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ Knitted Reactor Coil
For use with PHRED Reactor
MilliporeSigma™ Supelco™ Hydrocarbon Kit acc. to DIN EN 14039/ISO 16703
Kit contains:
- mineral oil standard for calibration 8 mg/ml in heptane
- alkane standard solution
- heptane
- standard solution for the determination of the retention time
- Florisil™ tubes