Air Sampling Filters and Devices
- (2)
- (3)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (2)
- (3)
- (13)
- (1)
- (1)
- (1)
- (2)
- (4)
- (3)
- (1)
- (3)
- (3)
- (1)
- (2)
- (1)
- (4)
- (1)
- (1)
- (3)
- (1)
- (3)
- (1)
- (15)
- (17)
- (3)
- (1)
- (3)
- (1)
- (1)
- (1)
- (1)
- (1)
- (6)
- (1)
- (1)
- (1)
- (7)
- (4)
- (3)
- (1)
- (5)
Filtered Search Results
MilliporeSigma™ Aerosol Analysis Monitors, 37 mm
Millipore's 37 mm Aerosol Analysis Monitors are transparent, disposable, plastic filter holders for use with Type MF (mixed cellulose esters) Millipore filters. A thin cellulose support seals the filter between monitor sections to distribute sample flow evenly over the filter surface.
| Connectors | FeMale Luer Slip |
|---|---|
| Diameter (English) | 1.4 in. |
| Diameter (Metric) | 3.7 cm |
| Color | White |
| Diameter (Metric) Filter | 3.7 cm |
| Material | Polystyrene |
| Filtration Area | 9 cm2 |
MilliporeSigma™ Supelco™ ORBO™ 23 2-HMP on Amberlite XAD-2 (20/40), 120/60 mg W,W,W separators
Used for gas and vapor sampling
Sartorius Accessories for the MD8 Airscan™ Air Sampler
Accessories for use with the MD8 Airscan™ Air Sampler. The MD8 is used for quantitative detection of airborne organisms, mainly in sterile areas of Class A/B cleanrooms, isolators, or blow-fill-seal machines.
| Disposable | Reusable |
|---|---|
| For Use With (Equipment) | MD8 Airscan Air Sampler |
MilliporeSigma™ Supelco™ radiello™ Triangular Support Plate
Acts as both a closure and means of suspension for the radiello™ diffusive body and cartridge adsorbent during passive air sampling
Cytiva Whatman™ Quartz Air Sampling Filters, Grade QM-A, Sheet
Used in many air sampling filter applications, including sampling of acidic gases, stacks, flues, and aerosols. Whatman™ Quartz Air Sampling Filters are sequentially numbered according to U.S. Environmental Protection Agency (EPA) standards and are suitable for most applications.
| Thickness (Metric) | 475 μm |
|---|---|
| Type | Air Sampling Filter |
| Basis Weight | 85 g/m2 |
| Format | Sheet |
| Length (Metric) | 20.3 cm |
| Airflow Rate | 6.3 s/100 mL/in2 |
| Length (English) | 8 in. |
| Grade | Grade QM-A |
| Material | High-purity Quartz |
| For Use With (Application) | Used for air sampling in acidic gases, stacks, flues and aerosols, particularly at high temperatures up to 500° C and in PM-10 testing.Filters for Use in US EPA PM10 Ambient air monitoring. |
| Dimensions (L x W) | 203.2 x 254 mm (8 x 10 in.) |
Cytiva Whatman™ EPM 2000 Air Sampling Filters
Used in high-volume PM-10 sampling equipment. Whatman™ EPM 2000 Air Sampling Filters are manufactured from 100% pure borosilicate glass. They enable detailed chemical analysis of trace pollutants with minimal interference.
| Thickness (Metric) | 450 μm |
|---|---|
| Type | EPM 2000 Air Sampling Filter |
| Basis Weight | 85 g/m2 |
| For Use With (Equipment) | High volume PM-10 air sampling equipment |
| Airflow Rate | 5.6 s/100 mL/in2 |
| Quantity | 100 Pk. |
| Grade | Grade EPM 2000 |
| Material | Borosilicate Glass |
| For Use With (Application) | For use in US EPA TSP ambient air monitoring.For use in high volume air sampling equipment that collects atmospheric particulates and aerosols. |
MilliporeSigma™ Supelco™ ASSET&Trade; EZ4-NCO Dry Sampler
ASSET EZ4-NCO dry sampler kit contains 2 ASSET EZ4-NCO cartridges, 2 tubing adapters, and 1 calibration fitting. The kit makes it easy to get started sampling with ASSET - 1 cartridge for sampling and the other as a field blank.
MilliporeSigma™ Supelco™ radiello™ Hydrogen Sulfide Starter Kit
radiello™ Starter Kits are ideal for introducing you to the product and include everything you need to take one complete sample. No additional parts are required.
MilliporeSigma™ Supelco™ ATIS Purge and Trap/Humidifier Module
Use to generate a dynamic humidified stream of carrier gas for spiking calibration standards
MilliporeSigma™ Aerosol Filter Holders, 47 mm
Vacuum-filter air or other gases from clean-room/open atmospheres/from closed systems for particulate contamination analysis.
| Diameter (Metric) Hose | 1.1 cm |
|---|---|
| Diameter (English) | 2.7 in. |
| Type | Laboratory Filter Holders or Cyclones |
| Diameter (Metric) | 6.9 cm |
| Diameter (English) Hose | 0.43 in. |
| Filtration Area | 9.6 cm2 |
MilliporeSigma™ Supelco™ ORBO™ 101 Carbotrap B (20/40), 100/50 mg W,W,W separators
Used for gas and vapor sampling
MilliporeSigma™ Supelco™ ORBO™ 47 Amberlite XAD-7 specially treated, 100/50 mg W,W,W separators
Used for gas and vapor sampling
MilliporeSigma™ Supelco™ ORBO™ 78 HBr on Carboxen 564 specially cleaned (20/45), 400/200 mg W,W,W separators
Used for gas and vapor sampling
MilliporeSigma™ Supelco™ Quartz Filter, 32 mm
Quartz Filter along with filter cartridge assembly enables simultaneous sampling of both the gas and particulate fractions