
Air Sampling Filters and Devices
- (2)
- (3)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (2)
- (3)
- (13)
- (1)
- (1)
- (1)
- (2)
- (4)
- (3)
- (1)
- (3)
- (6)
- (1)
- (2)
- (1)
- (4)
- (1)
- (1)
- (3)
- (1)
- (3)
- (1)
- (15)
- (2)
- (1)
- (4)
- (1)
- (2)
- (4)
- (7)
- (2)
- (3)
- (1)
- (1)
- (1)
- (19)
- (3)
- (1)
- (3)
- (1)
- (1)
- (1)
- (1)
- (1)
- (6)
- (1)
- (1)
- (1)
- (7)
- (3)

Includes | Pad |
---|---|
Pore Size | 0.8 μm |
Diameter (English) | 0.98 in. |
Type | Aerosol Monitor |
Color | White |
Diameter (Metric) Filter | 25 mm |
Material | MCE |
Filtration Area | 4 cm2 |
MilliporeSigmaâ„¢ Aerosol Analysis Monitors, 37 mm
Millipore's 37 mm Aerosol Analysis Monitors are transparent, disposable, plastic filter holders for use with Type MF (mixed cellulose esters) Millipore filters. A thin cellulose support seals the filter between monitor sections to distribute sample flow evenly over the filter surface.
Connectors | FeMale Luer Slip |
---|---|
Diameter (English) | 1.4 in. |
Diameter (Metric) | 3.7 cm |
Color | White |
Diameter (Metric) Filter | 3.7 cm |
Material | Polystyrene |
Filtration Area | 9 cm2 |
MilliporeSigmaâ„¢ Supelcoâ„¢ ORBOâ„¢ 32 Small Activated CocoNut Charcoal (20/40), 100/50 mg W,F,F separators
Used for gas and vapor sampling
Sartorius Accessories for the MD8 Airscanâ„¢ Air Sampler
Accessories for use with the MD8 Airscanâ„¢ Air Sampler. The MD8 is used for quantitative detection of airborne organisms, mainly in sterile areas of Class A/B cleanrooms, isolators, or blow-fill-seal machines.
Disposable | Reusable |
---|---|
For Use With (Equipment) | MD8 Airscan Air Sampler |
MilliporeSigmaâ„¢ Supelcoâ„¢ radielloâ„¢ Cartridge Adsorbents For Sampling BTEX and VOCs (thermal desorption), Matrix SS net (3 x 8 m, 4.8 mm diam.), Carbograph
For Sampling BTEX and VOCs (thermal desorption)
Cytiva Whatmanâ„¢ PM 2.5 Air Monitoring Filters
Low-chemical-background filters permit sensitive, interference-free determinations
MilliporeSigmaâ„¢ Supelcoâ„¢ Gas Sampling Bulbs
For trapping and transporting gas samples for analysis
Type | Gas Sampling Bulb |
---|---|
For Use With (Application) | Trapping and Transporting Gas Samples for Analysis |
MilliporeSigmaâ„¢ Supelcoâ„¢ Female Luer Fitting for 1/8 in. Tubing
Female Luer Fitting for 1/8 in. Tubing is an accessory for use with LpDNPH Cartridges suitable for air monitoring applications.
MilliporeSigmaâ„¢ Supelcoâ„¢ ATIS Replacement Parts
For use with ATIS Adsorbent Tube Injector Systems
For Use With (Equipment) | ATIS Adsorbent Tube Injector Systems |
---|---|
Quantity | 1 Each |
MilliporeSigmaâ„¢ Supelcoâ„¢ ORBOâ„¢ 351 4-TBC on Activated Coconut Charcoal (20/40), 100/50 mg
Solvent desorption tube designed for gas and vapor sampling.
MilliporeSigmaâ„¢ Supelcoâ„¢ ORBOâ„¢ 554 H2SO4 on Silica Gel (20/40) 150/75 mg
Solvent desorption tube designed for gas and vapor sampling.
Chlorphenamine N-Oxide Maleate, Certified Reference Material, MilliporeSigmaâ„¢ Supelcoâ„¢
Pharmaceutical secondary standards for application in quality control. Provides pharma laboratories and manufacturers with a convenient, and cost-effective alternative to the preparation of in-house working standards.
MilliporeSigmaâ„¢ Supelcoâ„¢ ASSET&Trade; EZ4-NCO Dry Sampler
ASSET EZ4-NCO dry sampler kit contains 2 ASSET EZ4-NCO cartridges, 2 tubing adapters, and 1 calibration fitting. The kit makes it easy to get started sampling with ASSET - 1 cartridge for sampling and the other as a field blank.
MilliporeSigmaâ„¢ Supelcoâ„¢ LpDNPH Ozone Scrubber Rezorian Cartridge, Potassium Iodide (KI)
Ozone scrubbers are recommended for sampling carbonyls in high humidity environments.