Gases and Gas Accessories

Gases and Gas Accessories
Filtered Search Results

Fisherbrand™ High Purity Hydrogen Gas Generators For GC Fuel Gas
High purity range of hydrogen gas generators offer convenient and safe alternatives to cylinder gas for gas chromatography.
Connections | 1/8 in. Compression |
---|---|
Outlet Port | compression fitting |
Height (Metric) | 45.6 cm |
Electrical Requirements | Universal (90V - 264V 50/60Hz) |
Outlet Size | 1/8 in. |
Warranty | 12 months on system, 24 months on PEM cell |
Outlet Pressure | 10 to 100 psig |
Depth (English) | 17 in. |
Width (English) | 13.5 in. |
For Use With (Application) | Gas chromatography, fuel gas, flame ionization detector (GC-FID) flame photometric detector (GC-FPD), Electrolytic Conductivity Detector (ELCD & Hall ELCD), other combustion detectors |
Pressure | 10 to 100 psig |
Width (Metric) | 34.2 cm |
Includes | US, UK and EU power cord, Water drain tube, DI cartridge, User Guide |
Max. Ambient Operating Temperature | 5°C to 40°C (41°F to104°F) |
Type | Hydrogen Fuel Gas Generator |
For Use With (Equipment) | Gas Chromatograph |
Depth (Metric) | 43.7 cm |
Voltage | 90-264 Universal Power Supply |
Frequency | 50/60 Hz |
Certifications/Compliance | CE, CSA, cULus |
Weight (Metric) | 23 kg (Full of water) |
Height (English) | 18 in. |
Fisherbrand™ Zero Air Generators For GC Fuels
Zero air generators produce a continuous stream of organic impurity-free air from external dry compressed air source and offer superior limits of detection over and above other modes of supply.
Outlet Port | compression fitting |
---|---|
Height (Metric) | 45.5 cm |
Warranty | 12 months on system |
Outlet Pressure | Up to 135 psig depending on inlet pressure |
Depth (English) | 16.7 in. |
Width (English) | 13.5 in. |
Purity | Gas purity: <0.1ppm total hydrocarbon as CH4 |
For Use With (Application) | Gas chromatography, Flame support gas, Flame ionization detector (GC-FID) Flame photometric detector (GC-FPD) |
Pressure | Varies with inlet. 5 psig less than inlet |
Width (Metric) | 34.2 cm |
Max. Ambient Operating Temperature | 5°C to 40°C (41°F to104°F) |
Type | Zero Air Gas Generator |
For Use With (Equipment) | Gas Chromatograph |
Depth (Metric) | 42.5 cm |
Max. Inlet Air Temperature | 104°F |
Certifications/Compliance | CE, cULus |
Weight (Metric) | 14.2 kg |
Height (English) | 18 in. |
Fisherbrand™ Multistage Gas Cylinder Regulators
For Noncorrosive General Purpose Gases. Diaphragm-Sensed Dual-Stage Regulators designed for consistent outlet pressure delivery.
Bonnet Material | Brass |
---|---|
Type | Cylinder Regulator |
Relief Valve | Yes |
Connection Type | Outlet needle valve with 0.25 in. NPTM thread |
Diaphragm Material | Neoprene |
Seal Material | Nylon Fabric, Nylon |
For Use With (Application) | Noncorrosive gases, requiring maintenance of a constant delivery pressure until cylinder contents are empty |
No. of Stages | Multi |
Seat Material | Orthane™ |
Gauge | Dual-scale |
Fisherbrand™ R31B Series High Purity Low Flow Gas Regulators
Diaphragm-Sensed Dual-Stage Regulators designed for analytical applications where a consistent outlet pressure and flow are desired. For Noncorrosive High Purity Gases.
Pressure Range (Inlet) | 3000 psi |
---|---|
Pressure Range (Outlet) | 30 in. Hg Vac-100 psi |
Outboard Leakage | 2 x 10-8 atm.cc/sec. heat inlet pressure: 1500 psi |
Operating Temperature Range (English) | -40°F to +165°F |
Diaphragm Material | 316L Stainless Steel |
Material | Nickel-plated Brass |
Knob Material | ABS Plastic |
For Use With (Application) | Cylinder, research laboratories, gas chromatography, process analyzers, petrochemical industry, power plant |
Operating Temperature Range (Metric) | -40°C to +74°C |
Includes | Diaphragm valve |
Bonnet Material | Nickel-plated Brass |
Gauge Pressure (English) | 2 in. |
Front Panel Thickness | 0.25 in. |
Type | Gas Regulator |
Gauge Pressure (Metric) | 5.08 cm |
Connection Type | 0.25 in. GENLOK |
Max. Outlet Pressure | 250 psi |
Weight (English) | 4.03 lb. |
Seal Material | Metal |
Inboard Leakage | 2 x 10-8 atm.cc/sec. He |
No. of Stages | Dual |
Seat Material | PCTFE |
Weight (Metric) | 1.82 kg |
Fisherbrand™ Heavy-duty Single-stage Gas Cylinder Regulator
Gas regulator for non-corrosive general purpose gases is designed for analytical applications with intermittent short intervals of use.
Fisherbrand™ High-Purity Stainless-Steel Single-Stage Regulators
For Semi-Corrosive High Purity Gases. These Diaphragm-Sensed Single-Stage Regulators are designed for analytical applications with intermittent short intervals of use.
Pressure Range (Inlet) | 3000 psi |
---|---|
Diameter (English) Gauge | 2 in. |
Operating Temperature Range (English) | -°F to +140°F |
Diaphragm Material | 316L Stainless Steel |
Filter Material | 10μ Sintered |
Material | Stainless Steel |
For Use With (Application) | Semi corrosive gases, extremely high purity gases, mildly corrosive or reactive gases, and toxic gases where slight variations in delivery pressure can be tolerated |
Diameter (Metric) Gauge | 5.08 cm |
Operating Temperature Range (Metric) | -4°C to +60°C |
Type | Gas Regulator |
Connection Type | 0.25 in. NPT outlet port |
Seal Material | PTFE Resin |
No. of Stages | Single |
Seat Material | PCTFE |
Fisherbrand™ High-Pressure Single-Stage Gas Cylinder Regulators
For noncorrosive general purpose gases. Single-Stage Regulators feature reliable piston design for precise gas control at high delivery pressure up to 1500PSI and 3000PSI
Type | Gas Regulator |
---|---|
Diameter (English) Gauge | 2.5 in. |
Connection Type | 0.25 in. NPT inlet |
Filter Material | Sintered Bronze |
Material | Brass |
For Use With (Application) | Use in hydrogenation, catalytic reduction, dead-end and pressure testing |
Diameter (Metric) Gauge | 6.35 cm |
No. of Stages | Single |
Seat Material | PCTFE |
Fisherbrand™ Gentec™ P4400 Point Of Use Gas Control Panel
Designed for accurate control of gases in low flow applications
Fisherbrand™ High-Purity Brass Single-Stage Regulators
Made from materials with surface finish that will not outgas impurities into the gas stream. For high purity noncorrosive gases
Pressure Range (Inlet) | 3000 psi |
---|---|
Diameter (English) Gauge | 2 in. |
Operating Temperature Range (English) | -°F to +140°F |
Diaphragm Material | 316L Stainless Steel |
Filter Material | 10μ Stainless Steel |
Material | Chrome-plated Brass |
For Use With (Application) | Ideal for instrument and OEM applications employing very high purity, noncorrosive gases and gas mixtures where some variations in delivery pressure can be tolerated |
Diameter (Metric) Gauge | 5.08 cm |
Operating Temperature Range (Metric) | -4°C to +60°C |
Type | Gas Regulator |
Connection Type | 0.25 in. NPT outlet port |
Seal Material | Viton™ |
No. of Stages | Single |
Seat Material | PCTFE |
Fisherbrand™ Multistage Gas Cylinder Regulators
Diaphragm-Sensed Dual-Stage Regulators designed for consistent outlet pressure delivery. For Noncorrosive General Purpose Gases.
Fisherbrand™ Single-Stage Lecture Bottle Gas Regulators
Featuring a lightweight, compact, single-stage design, these lecture bottle regulators are ideal for noncorrosive gases.
Pressure Range (Inlet) | 3000 psi |
---|---|
Type | Gas Regulator |
Connection Type | 0.12 in. NPTF inlet fitting |
Diaphragm Material | Neoprene |
Filter Material | 50μ Sintered Bronze |
Seal Material | Nylon |
Material | Chrome-plated Brass |
For Use With (Application) | Noncorrosive gases in lecture bottles and analyzer applications |
No. of Stages | Single |
Seat Material | Polyurethane |
Fisherbrand™ High-Purity Single-Stage Regulators
These Diaphragm-Sensed Single-Stage Regulators are designed for analytical applications with intermittent short intervals of use. For Semi-Corrosive High Purity Gases.
Fisherbrand™ Heavy-Duty Single-Stage Gas Cylinder Regulators
For noncorrosive general purpose gases. Diaphragm-Sensed Single-Stage Regulators are ideal for applications with intermittent short intervals of use.
Includes | Chrome-plated Brass outlet needle valve with 0.25 in. NPTM thread |
---|---|
Type | Gas Regulator |
Diameter (English) Diaphragm | 2.75 in. |
Diameter (Metric) Diaphragm | 7 cm |
Filter Material | Sintered Metal |
Material | Chrome-plated Brass |
For Use With (Application) | For noncorrosive gases requiring short intervals of use |
No. of Stages | Single |
Fisherbrand™ Zero Air Generators
Zero air gas generators provide a convenient and safe alternative to cylinder gas for gas chromatography combustion applications. These systems remove organic impurities from existing compressed air sources allowing the user to eliminate expensive bottled zero grade air from their lab.
Connections | 1.4 in. NPT (female) |
---|---|
Outlet Port | 1/4 in. NPT (female) |
Height (Metric) | 30 cm |
Outlet Size | 1/4 in. |
Warranty | 12 months on system |
Outlet Pressure | Up to 135 psig depending on inlet pressure |
Depth (English) | 3 in. |
Purity | Gas purity: <0.1ppm total hydrocarbon as CH4 |
For Use With (Application) | Gas chromatography, Flame ionization detector (GC-FID) flame photometric detector (GC-FPD), Electrolytic Conductivity Detector (ELCD & Hall ELCD), other combustion detectors |
Pressure | Varies with inlet. 5 psig less than inlet |
Width (Metric) | 25 cm |
Includes | US power cord, User guide |
Max. Ambient Operating Temperature | 5°C to 40°C (41°F to104°F) |
Flow Rate | 1 L/min. |
Type | Zero Air Gas Generator |
Capacity | 1 L/min |
No. of FIDs | 2-3 |
For Use With (Equipment) | Gas Chromatograph |
Depth (Metric) | 8 cm |
Frequency | 60 Hz |
Max. Inlet Air Temperature | 104°F |
Certifications/Compliance | CE, CSA, cULus |
Weight (Metric) | 3 kg |
Height (English) | 12 in. |
Fisherbrand™ Single-Stage Lecture Bottle Gas Regulators
Lightweight, compact, single-stage, lecture bottle regulators for noncorrosive gases