HPLC Valve and Injector Accessories
MilliporeSigma™ Supelco™ Rheodyne™ Model 3725i Preparative Sample Injector
Manual, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ Mobile Phase Solvent Debubbler with Bracket
Gas bubbles in the mobile phase reduce pump output and cause check valves to malfunction. The mobile phase debubbler removes bubbles from the pump inlet line. Bubbles in the incoming mobile phase rise in the debubbler, displacing an equal volume of liquid from the debubbler reservoir to the pump. When necessary, simply remove the cap and refill the reservoir -- the gas-liquid interface is visible through the housing.
MilliporeSigma™ Supelco™ Rheodyne™ Injector, Rheodyne™, 7725i
Internal position sensing switch, Manual, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ column Blank Kit for HPLC
Each column blank kit includes a precision-bore polished 316 stainless steel column blank, two zero dead volume external reducing unions (internal unions with 10 mm I.D. blanks) with nuts and ferrules for 1/16 in. O.D. tubing, and two 2 μm frits.
MilliporeSigma™ Supelco™ columnSaver Precolumn Filter
The new Supelco columnSaver offers all of the protection of conventional precolumn filters at much less the cost. With its convenient direct connect design, changeover time is measured in seconds, and requires no wrenches or tools to install.
MilliporeSigma™ Supelco™ Rheodyne™ Model 7000 Stream Switching Valve
Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ Rheodyne™ Model 8125 Low Dispersion Injector
Manual, Dispersion injector syringe loading, Number of ports: 6, Number of positions: 2
MilliporeSigma™ Supelco™ SSI™ High Pressure Precolumn Filter
In-line installation. The 316 stainless steel filter disc (0.5 μm pores) is easily replaced without removing the column end fitting. For 1/16 in. tubing. Maximum operating pressure: 15,000 psi (1,054 kg/cm2).
Thermo Scientific™ Bottom-of-the-Bottle™ Solvent Filters
Protect your HPLC system with Thermo Scientific™ Bottom-of-the-Bottle™ Solvent Filters.
MilliporeSigma™ Supelco™ Miniature Regulator with Gauge
Reliable pressure regulation to 1 psig (0.07 kg/cm2), indicated on a 0-60 psi (4.2 kg/cm2) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum body with acetyl resin bonnet. Maximum inlet pressure: 400 psi (28.1 kg/cm2).
MilliporeSigma™ Supelco™ Precolumn Filter Direct-Connect, PEEK
Direct-connect; protects analytical and guard columns.
Thermo Scientific™ RheBuild™ Kits
Everything you need to maintain your Thermo Scientific™ Rheodyne™ valves and injectors in your HPLC system.