Air-Purifying Respirator Cartridges and Filters
Air-purifying respirator cartridges and filters are installed in reusable half-mask or full-facepiece respirators to provide protection from airborne contaminants. Products are designed to protect against a variety of individual contaminants or combinations of contaminants, including dusts, particles, mists, aerosols, fumes, gases, and/or vapors.
Some products protect against both particulate and gaseous contaminants, however, there is no single filter and cartridge combination that protects against all substances.
Correct product selection depends on the environment(s) in which the product will be used and the type(s) of hazard(s) or risk(s) expected in the selected environment(s). NIOSH-rated cartridges and canisters use a color-coding system for secondary identification.
Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details for each filter and filter/cartridge package can be obtained at the individual product level and should be carefully scrutinized during selection.
3M™ Particulate Filter 2078, P95 Respiratory Protection/Nuisance/Acid/Gas/Organic Vapor
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance levels of organic vapor/acid gases and for ozone protection up to 10X OSHA PEL.
3M™ Advanced Particulate Filters
Designed to make breathing easier while lasting longer.
3M™ P100 Particulate Filter (Style 7093)
Especially suitable for asbestos abatement applications
3M™ 6000 Series Cartridges
NIOSH-approved cartridges for use with 3M™ full and half facepiece respirators 6000, 7000 and FF-400 Series.
3M™ Reusable Respirator Accessory, Filter Adapter 603
Used with 3M™ Particulate Filter 5N11 or 3M™ Particulate Filter 5P71 and 3M™ Filter Retainer 501.
3M™ P100 Particulate Filters
For oil- and non-oil applications
3M™ N95 and P95 Particulate Filters (5000/6000 Series)
NIOSH approved for environments containing certain non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501.
Bullard™ 6 Pack of HEPA High Efficient Particulate Filters
6 pack of HEPA High efficient particulate filters suitable for protection against airborne particulate (dust-mists and fumes).
3M™ Advanced Particulate Filter, P100
Designed to make breathing easier while lasting longer. NIOSH approved for environments containing certain oil and non-oil based particles.
3M™ P100 Hydrogen Fluoride Cartridge/Filter (Style 7093C)
The 3M™ Hydrogen Fluoride Cartridge/Filter 7093C is NIOSH approved and provides protection against hydrogen fluoride and oil/non-oil based particles.
3M™ Versaflo™TR-600 Series Filter Covers
Filter cover for use with TR- 6820N filter
3M™ Secure Click™ Filter Retainer
3M™ Secure Click™ Filter Retainer for holding Secure Click™ Particulate Filters
3M™ Filter Adapter 502
Use to attach 3M™ Particulate Filters 2000 Series and 7093 to the 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series for a wide variety of applications.
3M™ 5000 Series Respirator Accessory, Filter Retainer 501
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
3M™ Mercury Vapor/Organic Vapor/Acid Gas Cartridges/Filters 60927, P100
NIOSH-approved for protection against mercury vapor, chlorine, sulfur dioxide, organic vapor and hydrogen sulfide. NIOSH-approved P100 particulate filter for respiratory protection against certain oil and non-oil based particulates.