Gas Manifolds
DWK Life Sciences™ Kimble™ Kontes™ Vacuum/Gas Double Manifold with Glass Plugs
All-glass manifolds for connecting inert gas and vacuum sources
DWK Life Sciences™ Kimble™ Kontes™ Airless-ware™ Vacuum Flask
Facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer
DWK Life Sciences™ Kimble™ Kontes™ Vacuum/Gas Double Manifold with PTFE Valves
Grease-free operation
DWK Life Sciences™ Kimble™ Kontes™ Double Vacuum/Gas Manifold
Grease-free operation
DWK Life Sciences™ Kimble™ Kontes™ Vacuum/Gas Double Manifold with PTFE Valves Sealed at a 45° Angle
Valves sealed at 45° angle for easier manipulation.
Synthware™ Vacuum and Inert Gas Manifold with Hollow Glass Stopcocks, Front/Left, Rear/Left/Right Connection
No retention clip needed. Hollow stopcocks held in place by vacuum.
Synthware™ Double Manifold with Hollow Glass Stopcocks
General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0 to 4 mm high vacuum valves for grease-free operation. Both banks are made from 22 mm medium wall tubing and have all banks open. Ports are spaced 100 mm center to center and have an O.D. of 10 mm.
Synthware™ Single Vacuum Manifold with No. 15 O-ring
Four ports are spaced 100 mm center to center, with 0 to 8 mm high vacuum valves mounted on 45° angle to the operator for easy access.
Synthware™ Vacuum Manifold with High Vaccum Valves, Left Side Connection
PTFE High Vacuum valves eliminate the need for grease.
Synthware™ Vacuum Manifold with PTFE Stopcocks, Left/Right Side Connection
PTFE stopcocks eliminate the need for grease.
Synthware™ Vacuum and Inert Gas Manifold with Hollow Glass Stopcocks, Front Left, Rear Right Connection
No retention clip needed. Hollow stopcocks held in place by vacuum.
Synthware™ Vacuum Manifold with PTFE Stopcocks, Right Side Connection
PTFE stopcocks eliminate the need for grease.
Synthware™ Nitrogen/Argon Manifold with PFTE Stopcocks
14/20 Joint on beam allows you to keep syringes under inert environment
Synthware™ Vacuum Manifold, Double Bank
Vacuum Manifold, Double Bank with forward facing high vacuum valves allow easy operation of manifold inside of a fume hood. Main parts are spaced 100 mm center to center. Adapter components or stoppers are available and have to be ordered separately.
Synthware™ Vacuum or Inert Gas Manifold, High Pressure Valves, Front Left/Right, Rear/Left Connection
General purpose double bank manifold for use with vacuum and inert gas.