Air-Purifying Respirator Cartridges and Filters
Air-purifying respirator cartridges and filters are installed in reusable half-mask or full-facepiece respirators to provide protection from airborne contaminants. Products are designed to protect against a variety of individual contaminants or combinations of contaminants, including dusts, particles, mists, aerosols, fumes, gases, and/or vapors.
Some products protect against both particulate and gaseous contaminants, however, there is no single filter and cartridge combination that protects against all substances.
Correct product selection depends on the environment(s) in which the product will be used and the type(s) of hazard(s) or risk(s) expected in the selected environment(s). NIOSH-rated cartridges and canisters use a color-coding system for secondary identification.
Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details for each filter and filter/cartridge package can be obtained at the individual product level and should be carefully scrutinized during selection.
3M™ 6000 Series Cartridges
NIOSH-approved cartridges for use with 3M™ full and half facepiece respirators 6000, 7000 and FF-400 Series.
Honeywell™ North™Flexible Low Profile P100 Filters
Thin, high-performance respirator filters are P100 low profile, flexible filters. Available with or without nuisance odor relief.
Honeywell™ North™ Respirator Cartridges and Filters
Cartridges for use with 5500, RU8500 and 7700 Series half masks as well as 5400, RU6500 and 7600 Series full facepieces.
Honeywell™ North™ Low-Profile Cartridges and Cartridge/P100 Filter Combinations
Satisfy numerous industrial applications
3M™ Particulate Filter 2078, P95 Respiratory Protection/Nuisance/Acid/Gas/Organic Vapor
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance levels of organic vapor/acid gases and for ozone protection up to 10X OSHA PEL.
3M™ 7800S Series Full Facepiece Respirator Accessory, Cartridge Filter Adapter 701
Replacement part for 7800S Series full-facepiece respirators
3M™ Secure Click™ Nuisance Level Cartridges and Filters
Secure Click™ nuisance level cartridges and filters are NIOSH-approved for certain oil and non-oil based airborne particulate contaminants when used with 3M™ Secure Click™ facepieces.
3M™ Advanced Particulate Filter, P100
Designed to make breathing easier while lasting longer. NIOSH approved for environments containing certain oil and non-oil based particles.
3M™ Secure Click™ Filter Retainer
3M™ Secure Click™ Filter Retainer for holding Secure Click™ Particulate Filters
3M™ 5000 Series Respirator Accessory, Filter Retainer 501
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
3M™ Versaflo™TR-600 Series Filter Covers
Filter cover for use with TR- 6820N filter
3M™ Mercury Vapor/Organic Vapor/Acid Gas Cartridges 6007
NIOSH-approved cartridge for protection against mercury vapor, chlorine, sulfur dioxide, organic vapor and hydrogen sulfide.