Petrochemical Standards

Petrochemical Standards
- (6)
- (1)
- (19)
- (55)
- (1)
- (2)
- (3)
- (1)
- (1)
- (3)
- (2)
- (1)
- (2)
- (19)
- (2)
- (4)
- (12)
- (30)
- (3)
- (1)
- (24)
- (90)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (5)
- (1)
- (2)
- (1)
- (2)
- (2)
- (2)
- (1)
- (13)
- (2)
- (2)
- (1)
- (2)
- (2)
- (2)
- (1)
- (2)
- (2)
- (1)
- (2)
- (2)
- (1)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (8)
- (4)
- (1)
- (2)
- (1)
- (1)
- (1)

CAS | 68476-34-6 |
---|
Multi-Element Organometallic Oil Standards 23 Element, 500μg/g; SPEX CertiPrep™
ISO/IEC Guide 34 Certified, NIST-Traceable Certified Reference Material
Type | Certified Reference Material |
---|---|
Concentration or Composition Notes | Up to 68 elements are scanned with found values for ICP and ICP-MS standards. The found value of the trace metallic impurities is reported on the Certificate of Analysis. |
For Use With (Equipment) | AA, ICP, ICP/MS, IC, XRF, and Other Analytical Instrumentation |
Industry Type | Petrochemical Testing |
Element | Al,Ba,B |
Health Hazard 1 | May cause an allergic skin reaction |
Packaging | Triple-leached LDPE bottle |
DOT Information | Nonhazardous |
Chemical Name or Material | 23 Element Oil Standard |
Recommended Storage | Ambient |
Solvent or Matrix | Base Oil 75 |
Analyte or Component Names | Al,Ba,B |
ASTMâ„¢ D5307 Crude Oil Internal Standard, Certified Reference Material, MilliporeSigmaâ„¢ Supelcoâ„¢
Equal weights of the hydrocarbons listed. Add to the crude oil sample as the internal standard.
ASTMâ„¢ D5307 Crude Oil, Quantitative Standard 6.25% (w/w) Each Component, MilliporeSigmaâ„¢ Supelcoâ„¢
Equal weights of the hydrocarbons listed. Use to determine detector response factors (slight warming of mixture may be necessary to dissolve all components completely.)
ASTMâ„¢ D5442 C12-C60 Qualitative Retention Time Mix, 6.25% (w/w) Each Component, Analytical Standard, MilliporeSigmaâ„¢ Supelcoâ„¢
ANALYSIS OF PETROLEUM Waxes BY GC - Qualitative and quantitative mixes of n-paraffins are used for determining column resolution, retention times, and response factors.
C8-C40 Alkanes Calibration Standard in Dichloromethane (varied), MilliporeSigmaâ„¢ Supelcoâ„¢
Qualitative standard. May require warming before use.
EN 14105/D6584 Monoglyceride Stock Solution, 10 mg/mL Each Component in Pyridine, Analytical Standard, MilliporeSigmaâ„¢ Supelcoâ„¢
Sigma Life Science is committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency and waste prevention. For more information see the article in biofiles.