Chromatography Fittings
MilliporeSigma™ Supelco™ RheFlex™ PEEK Fittings Fitting Set, 1/8 in. Tubing
For Rheodyne valves. Hold to 5000 psi (350 kg/cm2).
MilliporeSigma™ Supelco™ Tubing Reamer
This 5 in. hand tool does a fine job of opening and rounding tubing ends thet are cut. The tip is stainless steel for durability and inertness; and the handle is wood for comfort.
MilliporeSigma™ Supelco™ Waters™ Fittings size 1/16 in.
Waters™ Fittings are used for connecting most HPLC columns to a 1/16 in. tubing system.
MilliporeSigma™ Supelco™ Mininert™ Valve, Screw Thread
Mininert™ valves can be used at temperatures up to 105°F.
Thermo Scientific™ SUN-SRi™ Dissolution Cannulae
Angled for easy access to samples
MilliporeSigma™ Supelco™ Michel-Miller Column Plug Front Seal, PTFE
Solid plug for use as stopper with Ace-Threds. Seals M-M column ends, Plugs with No. 50 Ace-Thred fit Ace large columns.
MilliporeSigma™ Supelco™ Y GlasSeal™ Connector, Fused Silica
Quickly connect three pieces of fused silica tubing of the same or different diameters without the need for tools.
MilliporeSigma™ Supelco™ Supeltex™ M-2 Double-Tapered Ferrule, 0.32 mm I.D. to 0.53 mm I.D. Column
Max. Temp.: 350°C. Composition: DuPont VESPEL SP-1 (100% polyimide). Characteristics: High reusability.
Restek™ Mininert Precision Sampling Valves for Vials
Convenient valves for repetitive sampling and limiting content exposure to the silicon septum.
Restek™ Capillary Column Rinsing Reservoir
Restore the performance of bonded-phase capillary columns by dissolving and removing soluble, nonvolatile residue, using this reservoir kit.
MilliporeSigma™ Supelco™ CapSeal Bullet™ Capillary Ferrule, Short Design, 0.32 mm Column I.D.
CapSeal Bullet™™ ferrules consist of a graphite material captured in an aluminum base. This unique design keeps the ferrule from adhering to the fitting, making it easy to remove. Eliminate the headache of digging out a stuck ferrule and risking damage to your fitting
MilliporeSigma™ Supelco™ Supeltex™ M-4 Capillary Ferrule, Long Design, 0.53 mm Column I.D.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Swagelok™ Nut, 202-1, Stainless Steel, 1/8 in.
Swage type fittings are one of the most popular connectors which are available in metal and plastic forms; they are very useful for connecting similar or dissimilar materials, like metal to glass or metal to plastic.
MilliporeSigma™ Supelco™ Swagelok™ Connector to Male NPT Brass, 1/4 in., 1/4 in. male NPT, 400-1-4
Nuts and ferrules included.