HPLC Valve and Injector Accessories
MilliporeSigma™ Supelco™ Rheodyne™ Model 7000L Stream Switching Valve, Large Bore
Manual, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ OPTI-SOLV™ Mini, Micro, and Nano Filter
The OPTI-SOLV™ Mini Filter provides low-impact filtering in a package no longer that a finger tight fitting. Use them to prolong the life of your analytical column, or before your mass spectrometer as a last line of defense against debris.
MilliporeSigma™ Supelco™ Mobile Phase Solvent Debubbler with Bracket
Gas bubbles in the mobile phase reduce pump output and cause check valves to malfunction. The mobile phase debubbler removes bubbles from the pump inlet line. Bubbles in the incoming mobile phase rise in the debubbler, displacing an equal volume of liquid from the debubbler reservoir to the pump. When necessary, simply remove the cap and refill the reservoir -- the gas-liquid interface is visible through the housing.
MilliporeSigma™ Supelco™ LC column Replacement Bed Supports
For use with flow adapter only.
MilliporeSigma™ Supelco™ Sample Diffusion Discs for LC columns
A 20 μm polyethylene disc sealed to an acrylic ring. Installed on top of column packing in an open-ended column, it protects the packing from disruption.
MilliporeSigma™ Supelco™ Manual Cutting Tool
Easily cut 1/16 in. stainless steel tubing, then deburr the cut end to ensure a uniform flow of gas or liquid.
Thermo Scientific™ Rheodyne™ Ports for Injector Models 7010 and 9010
Use these ports for your Thermo Scientific™ Rheodyne™ 7010 and 9010 Sample Injectors for HPLC.
MilliporeSigma™ Supelco™ Rheodyne™ Model 3725i Preparative Sample Injector
Manual, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ PlatePrep 96-well Vacuum Manifold Starter kit
The PlatePrep vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.
MilliporeSigma™ Supelco™ Replacement Bulb
λmax: 254 nm, For use with PHRED Reactor
MilliporeSigma™ Supelco™ Sample Loop for Model 7725 Injector, Stainless Steel
Sample loop for model 7725 injector (volume 100 μL) is best suited for advanced fluid-handling solutions for broad range of analytical instrumentation and in vitro diagnostic systems. It is useful in high performance liquid chromatographic (HPLC) systems and is quite accurate and precise in injecting 1 μL-5 mL concentration of samples.
MilliporeSigma™ Supelco™ HyperShear Ultra HPLC High Pressure Static Mixer, Binary Tee Housing Assembly, 18,000 psi
HyperShear Mixers incorporate a highly efficient cross-flow shearing mechanism which produces vortex shear mixing over a wide flow range. This mixing technology typically delivers between 25% to 200% better mixing efficiency compared to conventional packed bed or tortuous path mixers.
Thermo Scientific™ TracePLOT Particle Traps for GC Instruments
Safeguard your GC instruments from damage caused by dislodged particles entering the detector.
MilliporeSigma™ Supelco™ columnSaver Precolumn Filter
The new Supelco columnSaver offers all of the protection of conventional precolumn filters at much less the cost. With its convenient direct connect design, changeover time is measured in seconds, and requires no wrenches or tools to install.