HPLC Valve and Injector Accessories
Thermo Scientific™ Rheodyne™ Ports for Injector Models 7010 and 9010
Use these ports for your Thermo Scientific™ Rheodyne™ 7010 and 9010 Sample Injectors for HPLC.
MilliporeSigma™ Supelco™ HyperShear Ultra HPLC High Pressure Static Mixer, Binary Tee Housing Assembly, 18,000 psi
HyperShear Mixers incorporate a highly efficient cross-flow shearing mechanism which produces vortex shear mixing over a wide flow range. This mixing technology typically delivers between 25% to 200% better mixing efficiency compared to conventional packed bed or tortuous path mixers.
MilliporeSigma™ Supelco™ Packing Reservoirs for Non-Jacketed LC columns
Supplied complete with all fittings necessary for connection to threaded columns. The top has 1/4 -28 fitting.
MilliporeSigma™ Supelco™ OPTI-SOLV™ Mini, Micro, and Nano Filter
The OPTI-SOLV™ Mini Filter provides low-impact filtering in a package no longer that a finger tight fitting. Use them to prolong the life of your analytical column, or before your mass spectrometer as a last line of defense against debris.
MilliporeSigma™ Supelco™ Rheodyne™ Rotor Seal for Model 7125/7725/7725i Injector
Rotor Seal for Model 7125/7725/7725i Injector is an accessory for use with mainly Rheodyne™ model 7725 and 7725i injectors for operation at pH 0-14.
MilliporeSigma™ Supelco™ Sample Loop for Model 7725 Injector, Stainless Steel
Sample loop for model 7725 injector (volume 100 μL) is best suited for advanced fluid-handling solutions for broad range of analytical instrumentation and in vitro diagnostic systems. It is useful in high performance liquid chromatographic (HPLC) systems and is quite accurate and precise in injecting 1 μL-5 mL concentration of samples.
MilliporeSigma™ Supelco™ Manual Cutting Tool
Easily cut 1/16 in. stainless steel tubing, then deburr the cut end to ensure a uniform flow of gas or liquid.
Thermo Scientific™ Valco Accessories
Valco continues to offer a diverse line in terms of number of ports, fitting sizes, and materials of construction.
MilliporeSigma™ Supelco™ PEEK Inline Microfilter
Install between 2 pieces of capillary tubing, using Microtight tubing sleeves. PEEK housing with special PEEK fitting that encases the 0.5 μm PEEK frit. Through hole 0.006 in., swept volume 0.24 μL. Includes 2 MicroFingertight nuts, and 5 frits (1 installed).
MilliporeSigma™ Supelco™ Rheodyne™ Model 9725i PEEK Injector
Manual with MBB and switch, Number of ports: 6, Number of positions: 2
MilliporeSigma™ Supelco™ Rheodyne™ Model 9725 Injector
Manual, Number of ports: 6, Number of positions: 2
MilliporeSigma™ Supelco™ Rheodyne™ Model 7060 Selection Valve
Number of ports: 7 and Number of positions: 6