CO2 Incubators
- (26)
- (31)
- (14)
- (10)
- (7)
- (3)
- (1)
- (22)
- (15)
- (1)
- (3)
- (1)
- (5)
- (18)
- (2)
- (1)
- (1)
- (45)
- (1)
- (33)
- (34)
- (1)
- (22)
- (12)
- (4)
- (4)
- (2)
- (1)
- (11)
- (8)
- (3)
- (4)
- (43)
Filtered Search Results
Fisherbrand™ Isotemp™ Direct Heat CO2 Incubator, 184 L, Stainless Steel
CO2 Sensor: TC Sensor; Temperature Range: Ambient +5°C to 55°C
Fisherbrand™ Isotemp™ Direct Heat CO2 Incubator, 184 L, Stainless Steel
CO2 Sensor: IR Sensor; Temperature Range: Ambient +5°C to 55°C
Fisherbrand™ Isotemp™ Water Jacketed CO2 Incubator, 184 L, Stainless Steel
CO2 Sensor: TC Sensor; Temperature Range: Ambient +5°C to 55°C
Fisherbrand™ Isotemp™ Water Jacketed CO2 Incubator, 184 L, Stainless Steel
CO2 Sensor: IR Sensor; Temperature Range: Ambient +5°C to 55°C
Thermo Scientific™ Forma™ Steri-Cycle™ CO2 Incubator, 184 L, Polished Stainless Steel
Experience continuous protection against unwanted airborne contaminants, and an on-demand, high-temperature sterilization cycle that simplifies routine cleaning.
| Data Outputs | Optional 4-20mA |
|---|---|
| Description | Single 184L incubator |
| Relative Humidity | <90% at 37°C |
| Capacity (English) | 6.5 cu. ft. |
| Chamber Material | Polished Stainless Steel |
| Dimensions (D x W x H) Interior | 20 x 21.3 x 26.8 in. (50.8 x 54.1 x 68.1 cm) |
| Capacity (Metric) | 184 L |
| Material | Stainless Steel |
| Type | CO2 Incubator |
| Dimensions (L x W x H) | 25 x 26.3 x 39.5 in. (63.5 x 66.8 x 100.3 cm) |
| Oxygen Control | None |
| Humidity Source | Water Pan |
| Lighting | LED |
| Weight (English) | 260 lb. |
| Certifications/Compliance | UL, cUL, CE |
| Temperature Range (Metric) | Ambient +5° to 50°C |
| CO2 Concentration Range | 0 to 20% |
Thermo Scientific™ Gateway Accessory Kit for OPC™ UA enablement of Heracell VIOS and Forma Steri-Cycle CO2 Incubators
Benefit from paperless record keeping, remote monitoring, cloud analytics and more by incorporating your CO2 Incubator into your DCS (Distributed Control Systems) using the Gateway Accessory Kit for OPC™ UA enablement of the Heracell VIOS and Forma Steri-Cycle.
| Electrical Requirements | Power supply with mains plug 100-240V |
|---|---|
| Type | Gateway Device for OPC UA |
| Oxygen Control | None |
| Plug Type | Power supply with mains plug 100-240V |
| Lighting | No Lighting |
| Voltage | 100/240 V |
| CO2 Sensor Technology | No Sensor |
| Material | Polystyrene, Polyethylene |
| For Use With (Application) | OPC UA Integration |
Thermo Scientific™ Heracell™ Vios 160i CR CO2 Incubator, 165 L
The Heracell™ Vios 160i CR is the first of it's kind, a certified cleanroom-compatible CO2 Incubator. Designed with both active particle control and rigorous cleaning compatibility in mind, this incubator sets the standard for cleanroom incubation. A factory compliance acceptance package is included to support the documentation needs commonly found in GMP settings.
| Data Outputs | USB, 4-20 mA |
|---|---|
| Description | Single 165 L incubator including IR sensor, 4-20 mA data output, and factory compliance acceptance Pk. |
| Relative Humidity | >93% at 37°C |
| Capacity (English) | 5.8 cu. ft. |
| Dimensions (D x W x H) Interior | 22.7 x 18.5 x 23.9 in. (57.6 x 47 x 60.7 cm) |
| Capacity (Metric) | 165 L |
| Material | Stainless Steel |
| Type | CO2 Incubator |
| Dimensions (L x W x H) | 34.6 x 25.1 x 35.4 in. (88 x 63.7 x 90 cm) |
| Oxygen Control | Optional 1 to 21% or 5 to 90% |
| Humidity Source | Covered integrated water reservoir |
| Lighting | LED |
| CO2 Sensor Technology | IR Sensor |
| Weight (English) | 183 lb. |
| Certifications/Compliance | CE, CSA |
| Temperature Range (Metric) | Ambient +3° to 55°C |
| CO2 Concentration Range | 1 to 20% |
Thermo Scientific™ Forma™ Steri-Cult™ CO2 Incubator, 232L & 323L, CTS™ Series
Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators - CTS Series, complete with documentation and validation to support GMP production needs
| Data Outputs | 4-20 mA |
|---|---|
| Type | CO2 Incubator |
| Humidity Source | External humidity reservoir |
| Relative Humidity | 95%, Controllable |
| Lighting | LED |
| Chamber Material | Electropolished Stainless Steel |
| CO2 Sensor Technology | IR Sensor |
| Material | Stainless Steel |
| Certifications/Compliance | UL, cUL, CE |
| Temperature Range (Metric) | Ambient +5° to 50°C |
| CO2 Concentration Range | 0 to 20% |
Thermo Scientific™ VIOS 160L 3 Door Inner Gas Tight Screen Door
VIOS 160L 3 Door inner gas tight screen door
Thermo Scientific™ Heracell™ 240i CO2 Incubator, 240L, General Purpose
Protect valuable samples while optimizing cell growth. Thermo Scientific™ Heracell™ 240i CO2 Incubators with copper or stainless steel chambers provide the ideal in vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user interface.
| Data Outputs | RS232 |
|---|---|
| Description | Single 240 L incubator, standard model |
| Relative Humidity | Approx. 93% at 37°C |
| Capacity (English) | 8.4 cu. ft. |
| Dimensions (D x W x H) Interior | 23 x 23.9 x 26.4 in. (58.3 x 60.7 x 67 cm) |
| Capacity (Metric) | 240 L |
| For Use With (Application) | General Purpose |
| Type | CO2 Incubator |
| Dimensions (L x W x H) | 32.8 x 30.7 x 36.8 in. (83.4 x 78 x 93.4 cm) |
| Oxygen Control | Optional 1 to 21% or 5 to 90% |
| Humidity Source | Integrated water reservoir |
| Lighting | LED |
| CO2 Sensor Technology | TC Sensor |
| Weight (English) | 178 lb. |
| Temperature Range (Metric) | Ambient +3° to 55°C |
| O2 Concentration Range | Optional 1 to 21% or 5 to 90% |
| CO2 Concentration Range | 0 to 20% |
Thermo Scientific™ Heracell™ 150i and 240i CO2 Incubators with Copper Chambers
Touch screen operating simplicity with exclusive 100% pure copper interior chamber
Thermo Scientific™ Cell Locker™ Chamber with Stainless Steel Tray, Stainless Steel
Protected chambers for your most sensitive cells