Syringeless and Syringe Filters
- (8)
- (13)
- (297)
- (9)
- (91)
- (1)
- (408)
- (1)
- (14)
- (16)
- (2)
- (3)
- (20)
- (1)
- (16)
- (1)
- (2)
- (5)
- (2)
- (1)
- (3)
- (3)
- (26)
- (3)
- (9)
- (1)
- (2)
- (9)
- (72)
- (3)
- (17)
- (1)
- (4)
- (37)
- (1)
- (19)
- (2)
- (133)
- (99)
- (2)
- (98)
- (1)
- (43)
- (53)
- (109)
- (27)
- (4)
- (2)
- (1)
- (8)
- (4)
- (3)
- (8)
- (63)
- (26)
- (592)
- (151)
- (11)
- (494)
- (21)
- (32)
- (13)
- (22)
- (189)
Résultats de la recherche filtrée
| Stérilité | Sterile |
|---|---|
| Quantité | 50/Pk. |
| Diamètre (métrique) | 33 mm |
| Type d’entrée | Female Luer Lock |
| Matériau de boîtiers | Acrylic |
| Type de sortie | Male Leur-Slip |
| Matériau (membrane) | PES |
Choice™ Nylon Syringe Filters
Use Thermo Scientific™ Choice™ Nylon Syringe Filters as the economic option for most general laboratory filtration, and for filtration of most HPLC samples.
| Type | Syringe Filter |
|---|---|
| Jetable | Single-use |
| Stérilité | Non-sterile |
| Gamme de produits | Choice |
| Préfiltre | No |
| Quantité | 100/Pk. |
| Matériau de boîtiers | Solvent Resistent, Low-Extractable Polypropylene |
| Pression nominale | 90 psi |
| À utiliser avec (application) | HPLC, SPE |
| Matériau (membrane) | Nylon |
MilliporeSigma Millex Hydrophobic PTFE Syringe Filter
0.2 μm pore size for sterile filtration of gases or venting
MilliporeSigma Millex Hydrophobic PTFE Syringe Filter
0.2 μm pore size for sterile filtration of gases or organic liquids
MilliporeSigma™ Millex™-HV Syringe Filter with PVDF Membrane
High flow rates and throughput, low levels of extractables and broad chemical compatibility. MilliporeSigma™ Millex-HV Syringe Filter with PVDF Membrane bind far less protein than nylon, nitrocellulose membranes, or PTFE membranes.
MilliporeSigma™ Millex™ LG Syringe Filter with Hydrophilic LCR PTFE Membrane
Designed for sample preparation and low protein binding fine particle removal from solvents, aqueous and organic solutions. Millex™ LG Syringe Filters with Hydrophilic LCR PTFE Membranes are for non-sterile filtration.
| À utiliser avec (équipement) | Syringe |
|---|---|
| Matériau | PTFE |
| Zone de filtration | 3.9 cm2 |
| Diamètre (métrique) | 25 mm |
| Température (métrique) Max | 45°C |
| Porosité | 0.2 μm |
| Type de sortie | Male Luer Slip |
| Volume (métrique) | 100 mL |
| Pression nominale | 6.9 (100)bar(psi) |
| À utiliser avec (application) | This 25 mm syringe filter with a hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 μm pore size used in low protein binding fine particle removal from aqueous & organic solutions. |
| Type | Millex-LG |
| Stérilité | Non-sterile |
| Volume mort (après purge de l’air) | <100 μL |
| Type d’entrée | Female Luer Lock |
| Code couleur | Natural inlet/natural outlet |
MilliporeSigma™ Millex™-LG Syringe Filter, 0.20μm, Hydrophilic PTFE
Features a hydrophilic PTFE membrane. MilliporeSigma™ Millex™-LG Syringe Filter, 0.20μm, Hydrophilic PTFE is used in non-sterile filtration to remove low protein binding fine particles from aqueous and organic solutions. These filters are recommended for filtration prior to instrumentation analysis.
MilliporeSigma™ Millex-GV Filter, 0.22 μm
The Vented Millex™-GV filter unit SLGVV255F are syringe filters for sterilization of low volume aqueous solutions for direct patient care applications, where venting and low protein binding membrane are required or desired.
Choice™ Polypropylene (PP) Syringe Filters
Use Choice Polypropylene Syringe Filters as an economic solution to filtration of biological samples, and for filtration of aggressive organic solutions.
| Type | Syringe Filter |
|---|---|
| Matériau | Polypropylene |
| Jetable | Single-use |
| Stérilité | Non-sterile |
| Gamme de produits | Choice |
| Préfiltre | No |
| Quantité | 100/Pk. |
| Matériau de boîtiers | Solvent Resistent, Low-Extractable Polypropylene |
| Pression nominale | 90 psi |
| À utiliser avec (application) | HPLC, SPE |
| Matériau (membrane) | Polypropylene (Hydrophilic) |
MilliporeSigma™ Millex™ Syringe Filter, Fluoropore™ PTFE, Hydrophobic, 0.2 μm
Millex™ Syringe Filters for removing particulates, reducing signal-to-noise ratios and maintaining flat baselines.
MilliporeSigma™ Millex™ Syringe Filter, Hydrophilic PTFE, 0.2 μm
For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines
MilliporeSigma™ Millex™ Product Container
Designed for convenient, benchtop storage of 33 mm Millex syringe filters.