Syringeless and Syringe Filters
- (8)
- (13)
- (297)
- (9)
- (91)
- (1)
- (408)
- (1)
- (14)
- (16)
- (2)
- (3)
- (20)
- (1)
- (16)
- (1)
- (2)
- (5)
- (2)
- (1)
- (3)
- (3)
- (26)
- (3)
- (9)
- (1)
- (2)
- (9)
- (72)
- (3)
- (17)
- (1)
- (4)
- (37)
- (1)
- (19)
- (2)
- (133)
- (99)
- (2)
- (98)
- (1)
- (43)
- (53)
- (109)
- (27)
- (4)
- (2)
- (1)
- (8)
- (4)
- (3)
- (8)
- (63)
- (26)
- (592)
- (151)
- (11)
- (494)
- (21)
- (32)
- (13)
- (22)
- (189)
Résultats de la recherche filtrée
| Stérilité | Sterile |
|---|---|
| Quantité | 50/Pk. |
| Diamètre (métrique) | 33 mm |
| Type d’entrée | Female Luer Lock |
| Matériau de boîtiers | Acrylic |
| Type de sortie | Male Leur-Slip |
| Matériau (membrane) | PES |
MilliporeSigma™ Millex™ Syringe Filter, Durapore™ (PVDF), 0.45 μm
Remove particulates, reduce signal-to-noise ratios and maintain flat baselines. Millex™ Nonsterile 33 mm Syringe Filters are constructed of polyethylene housing with Durapore™ membranes for preparing samples for analysis. Available in two pore sizes.
| Type de filtre | Syringe Filter |
|---|---|
| Code de filtre | HV |
| Jetable | Single-use |
| Zone de filtration | 4.5 cm2 |
| Diamètre (métrique) | 33 mm |
| Porosité | 0.45 μm |
| Volume (métrique) | <100 mL |
| À utiliser avec (application) | Analytical sample prep |
| Type | Syringe Filter |
| Stérilité | Non-sterile |
| Gamme de produits | Millex |
| Volume mort (après purge de l’air) | ≤80 μL |
| Diamètre (métrique) du filtre | 33 mm |
| Matériau de boîtiers | Polypropylene |
| Matériau (membrane) | PVDF |
| Code couleur | Yellow |
MilliporeSigma™ Millex™-VV Sterile Syringe Filter Unit, PVDF, 0.1 μm
Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0μm pore sizes
MilliporeSigma Dualex Ultra Transducer Protector
0.22 μm pore size for sterile gas filtration or venting
MilliporeSigma™ Millex™ Syringe Filter, Fluoropore™ PTFE, Hydrophobic, 0.2 μm
Millex™ Syringe Filters for removing particulates, reducing signal-to-noise ratios and maintaining flat baselines.
MilliporeSigma™ Millex™ Syringe Filter, Hydrophilic PTFE, 0.2 μm
For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines
Thermo Scientific™ Titan3™ GMF (Glass MicroFiber) Syringe Filters
Ensure cleaner sample extracts by removing interfering materials and fine particles prior to injection with these robust GMF (glass microfiber) syringe filters.
| Type de filtre | Syringe Filter |
|---|---|
| Certifications/Conformité | Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. |
| Jetable | Single-use |
| Diamètre (métrique) | 30 mm |
| Volume (métrique) | <137 μL (Hold Up) |
| Pression nominale | 210 psi |
| À utiliser avec (application) | Sample Filtration: dissolution testing; general use |
| Type | Syringe Filter |
| Stérilité | Non-sterile |
| Gamme de produits | Titan3 |
| Préfiltre | No |
| Quantité | 100 Pk. |
| Volume mort (après purge de l’air) | <157 μL |
| Matériau de boîtiers | Polypropylene |
| Matériau (membrane) | Glass Microfiber |
MilliporeSigma™ Millex™ Syringe Filter, Hydrophilic PTFE, 0.2 μm
For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines
MilliporeSigma Millex Hydrophobic PTFE Syringe Filter
0.2 μm pore size for sterile filtration of gases or organic liquids
MilliporeSigma™ Millex™ LG Syringe Filter with Hydrophilic LCR PTFE Membrane
Designed for sample preparation and low protein binding fine particle removal from solvents, aqueous and organic solutions. Millex™ LG Syringe Filters with Hydrophilic LCR PTFE Membranes are for non-sterile filtration.
| À utiliser avec (équipement) | Syringe |
|---|---|
| Matériau | PTFE |
| Zone de filtration | 3.9 cm2 |
| Diamètre (métrique) | 25 mm |
| Température (métrique) Max | 45°C |
| Porosité | 0.2 μm |
| Type de sortie | Male Luer Slip |
| Volume (métrique) | 100 mL |
| Pression nominale | 6.9 (100)bar(psi) |
| À utiliser avec (application) | This 25 mm syringe filter with a hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 μm pore size used in low protein binding fine particle removal from aqueous & organic solutions. |
| Type | Millex-LG |
| Stérilité | Non-sterile |
| Volume mort (après purge de l’air) | <100 μL |
| Type d’entrée | Female Luer Lock |
| Code couleur | Natural inlet/natural outlet |
MilliporeSigma™ Millex-GV Filter, 0.22 μm
The Vented Millex™-GV filter unit SLGVV255F are syringe filters for sterilization of low volume aqueous solutions for direct patient care applications, where venting and low protein binding membrane are required or desired.
Choice™ Polypropylene (PP) Syringe Filters
Use Choice Polypropylene Syringe Filters as an economic solution to filtration of biological samples, and for filtration of aggressive organic solutions.
| Type | Syringe Filter |
|---|---|
| Matériau | Polypropylene |
| Jetable | Single-use |
| Stérilité | Non-sterile |
| Gamme de produits | Choice |
| Préfiltre | No |
| Quantité | 100/Pk. |
| Matériau de boîtiers | Solvent Resistent, Low-Extractable Polypropylene |
| Pression nominale | 90 psi |
| À utiliser avec (application) | HPLC, SPE |
| Matériau (membrane) | Polypropylene (Hydrophilic) |