Capsules and Inline Filters
- (10)
- (47)
- (3)
- (7)
- (17)
- (2)
- (37)
- (3)
- (23)
- (22)
- (3)
- (1)
- (2)
- (3)
- (42)
- (18)
- (63)
- (56)
- (1)
- (45)
- (1)
- (19)
- (9)
- (74)
Résultats de la recherche filtrée
MilliporeSigma™ Opticap™ XL2 Capsule Filter without Prefilter Layer
For removing particles and microorganisms from aqueous liquid streams in large volume parenteral or ophthalmics manufacturing
| Zone de filtration | 0.09 m2 |
|---|---|
| Porosité | 0.45 μm |
| À utiliser avec (application) | For removing particles and microorganisms from aqueous liquid streams in large volume parenteral or ophthalmics manufacturing |
| Matériau (membrane) | PVDF |
MilliporeSigma™ Aervent-50 Disposable Filters
Sterilizing-grade filters designed for critical small-scale gas line and air venting applications
| Diamètre (métrique) | 62 mm |
|---|---|
| Porosité | 0.2 μm |
| Autoclavable | Autoclavable |
Cytiva Whatman™ Polycap Disposable Capsules, 150 TF
Polycap 150 TF filters for filtration of organic solutions, aggressive solutions, air and gas
| Pression max. | 4.1 bar (60 psi) |
|---|---|
| Autoclavable | Autoclavable |
| Matériau de boîtiers | Polypropylene |
| Matériau (membrane) | PTFE |
MilliporeSigma™ Millipak™ Disposable Filter Units
Removes particles and microorganisms from liquids and gases with pump-driven filter. Millipak™ Disposable Filter Units provide sterile filtration of parenterals, diagnostics, buffers, media, and biologicals.
| Type | Filter Unit |
|---|---|
| Matériau | Polycarbonate |
| Jetable | Single-use |
| Diamètre (impériale) | 3 in. |
| Pression d’entrée max. | 75 psi at 25°C |
| Diamètre (métrique) | 7.6 cm |
Cytiva Whatman™ HEPA-Vent Filter
Strengthened glass filter media by dual lamination with a tough polyester monofilament. Whatman™ HEPA-Vent Filters are ideal for air and gas filtration applications where high retention, dirt-holding capacity and flow rates are required.
Cytiva Whatman™ Polycap Disposable Capsules, 75 AS
Polycap 75 AS filters for filtration of aqueous solutions
| Matériau de boîtiers | Polypropylene |
|---|---|
| À utiliser avec (application) | Filtration of aqueous solutions (such as cell culture media, serum enzymes and water) and removal of bacteria and debris. |
| Matériau (membrane) | Nylon |
Cytiva Whatman™ Polycap Disposable Capsules, 75 TF
Sterilizes and removes particles from air/gas/liquid streams. Whatman™ Polycap Disposable Capsules, 75 TF ensure clean inert gases in vial filling lines and isolation of exhaust from fermenters.
| Zone de filtration | 1000 cm2 |
|---|---|
| Diamètre (métrique) du disque | 75 mm |
| Pression max. | 4.1 bar (60 psi) |
| Autoclavable | Autoclavable |
| Matériau de boîtiers | Polypropylene |
| Matériau (membrane) | PTFE |
Cytiva Whatman™ Polycap HD Disposable Capsules, 150 HD
Offers high filtration efficiency and excellent filtrate purity
| Quantité | 5/Pk. |
|---|---|
| À utiliser avec (application) | Polycap HD 150 |
MilliporeSigma™ Sampling Capsule for Metals Analysis, 0.45 μm
Disposable, EPA-accepted method for collecting groundwater prior to dissolved metals analysis.
| Certifications/Conformité | Certified for 67 metals and 2 anions; meet U.S. EPA filtration requirements for 0.45 μm filtration. |
|---|---|
| Type | Pharmaceutical Filters or Ultrafilters |
| Diamètre (métrique) de la membrane | 7.6 cm |
| Zone de filtration | 600 cm2 |
| Stérilité | Non-sterile |
| Porosité | 0.45 μm |
| Autoclavable | Not Autoclavable |
| Matériau de boîtiers | HDPE |
MilliporeSigma™ OptiScale™ Capsule Filters for Clarification and Prefiltration with Millgard Media
For media selection, process screening and scaling
| Zone de filtration | 17.7 cm2 |
|---|---|
| À utiliser avec (application) | For media selection; process screening; scaling |
| Matériau (membrane) | MCE |
MilliporeSigma™ OptiScale™ Capsule Filters for Clarification and Prefiltration with Durapore Media
for Clarification and Prefiltration with Durapore Media
| Stérilité | Non-sterile |
|---|---|
| Porosité | 0.45 μm |
| Matériau (membrane) | Durapore |
Cytiva Whatman™ Hepa-Cap™ In-Line Venting Filters
For use in scientific, research and industrial environments where high retention, dirt-holding capacity and flow rates are required
| Pression max. | 4.1 bar (60 psi) |
|---|---|
| Porosité | 0.3 μm |
| Type d’entrée | 3/8 in. FNPT |
| Autoclavable | Autoclavable |
| Matériau de boîtiers | Polypropylene |
| Type de sortie | 3/8 in. FNPT |
| À utiliser avec (application) | For use in scientific, research and industrial environments where high retention, dirt-holding capacity and flow rates are required |
Cytiva Whatman™ Polycap GW 75 High-Capacity Capsules
Filter GW (Ground Water) samples before dissolved metal analysis
| Débit | 60 |
|---|---|
| Certifications/Conformité | Certified for low metal extractables; Suitable for EPA Method 3005 for groundwater analysis |
| Zone de filtration | 600 cm2 |
| Stérilité | Non-sterile |
| Pression max. | 4.1 bar (60 psi) |
| Porosité | 0.45 μm |
| Matériau de boîtiers | Polypropylene |
| Matériau (membrane) | PES |
Cytiva Whatman™ Polydisc GW In-line Filters
Allows filtration of larger volumes of even heavily particle-laden samples. Whatman™ Polydisc GW In-Line Filters are batch certified for low background values for the determination of trace elements.
| Raccord d’entrée (métrique) | Tubing Nozzle 6 to 14 mm i.d. hose |
|---|---|
| Type | Polydisc GW Filter |
| Zone de filtration | 20.4 cm2 |
| Diamètre (métrique) du disque | 50 mm |
| Diamètre (métrique) | 52 mm |
| Pression max. | 4.5 bar (65 psi) |
| Porosité | 0.45 μm |
| Autoclavable | Autoclavable |
| Matériau de boîtiers | Polypropylene |
| Volume (métrique) | Up to 200 mL |
| À utiliser avec (application) | Preparation of larger volumes of groundwater samples for the analysis of dissolved heavy metals |
| Matériau (membrane) | Polyamide |
GVS™ Calyx™ Capsule Filters
GVS™ Calyx™ Capsule Filters are all purpose polypropylene filters, designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams.
| Description | Capsule Filter |
|---|---|
| Zone de filtration | 748 cm2 |
| Stérilité | Non-sterile |
| Quantité | 1 |
| Température (métrique) Max | 43°C |
| Pression max. | 80 psi @ 70°F (liquid); 50psi @ 70°F (Gas) |
| Autoclavable | Autoclavable |
| Matériau de boîtiers | Polypropylene |
| Température (impériale) max. | 110°F |
| Matériau (membrane) | Polypropylene |