Syringeless and Syringe Filters
- (8)
- (12)
- (279)
- (9)
- (74)
- (1)
- (376)
- (1)
- (14)
- (12)
- (1)
- (3)
- (20)
- (1)
- (14)
- (1)
- (2)
- (5)
- (2)
- (1)
- (3)
- (3)
- (21)
- (3)
- (9)
- (2)
- (5)
- (63)
- (3)
- (17)
- (1)
- (4)
- (37)
- (1)
- (12)
- (2)
- (127)
- (86)
- (2)
- (91)
- (1)
- (42)
- (53)
- (96)
- (20)
- (4)
- (2)
- (1)
- (8)
- (4)
- (3)
- (7)
- (57)
- (26)
- (567)
- (125)
- (6)
- (471)
- (16)
- (31)
- (13)
- (22)
- (187)
Filtered Search Results
Cytiva Whatman™ 25 mm Puradisc RC Syringe Filters, 0.2 μm
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Syringe filter with RC membrane, hydrophilic and chemically resistant for use with both aqueous and aggressive organic solvents.
| Pore Size | 0.2 μm |
|---|---|
| Type | Syringe Filter |
| Outlet Style | Male Slip Luer |
| Diameter (Metric) | 25 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Polypropylene |
| Sample Volume | Up to 100 mL |
| Autoclavable | Autoclavable |
| Sterility | Non-sterile |
| Dimensions (L x W) | 22.9 x 28.4 mm |
| Membrane Type | RC Membrane |
| Max. Pressure | 5.2 bar (75 psi) |
| Filtration Area | 4.2 cm2 |
DWK Life Sciences DURAN™ 5.8 mm Connector and 0.2 μm Syringe Disk Filter
Syringe Filter (0.2 μm) with connector, non-sterile 0.2 μm filter and female Luer Slip to 5.8 mm male connector, with O-ring seal.
Cytiva Whatman™ Mini-UniPrep™ Syringeless Filters with Preslit Septa
Processes sample loads in one-third the time. Whatman™ Mini-UniPrep™ Syringeless Filters with Preslit Septa provide a faster and easier way to remove particulates from samples being prepared for HPLC and UHPLC analysis.
| For Use With (Application) | Routine HPLC/UHPLC analysis; Composite assays; Content uniformity; Protein precipitation; Solubility testing; Dissolution testing; Sample filtration; Standard robotics on HPLC instruments with sensitive needles, allowing for higher throughput; Light sen |
|---|
Basix™ Syringe Filters, PTFE, Non-Sterile
Attach to the end of syringes and filter contents as it is being forced out. Fisherbrand™ Basix™ Syringe Filters, PTFE, Non-Sterile offers high sample throughput.
| Housing Material | Polypropylene |
|---|---|
| Material (Membrane) | PTFE (Hydrophobic) |
| Sterility | Non-sterile |
Basix™ Syringe Filters, PES, Sterile
Attach to the end of syringes and filter contents as it is being forced out. Fisherbrand™ Basix™ Syringe Filters, PES, Sterile offers high sample throughput.
| Diameter (Metric) | 25 mm |
|---|---|
| Housing Material | Acrylic |
| Material (Membrane) | PES |
| Sterility | Sterile |
Basix™ Syringe Filters, PVDF, Sterile
Attach to the end of syringes and filter contents as it is being forced out. Fisherbrand™ Basix™ Syringe Filters, PVDF, Sterile offers high sample throughput.
| Diameter (Metric) | 25 mm |
|---|---|
| Housing Material | Acrylic |
| Material (Membrane) | PVDF |
| Sterility | Sterile |
| Outlet Style | Male Leur-Slip |
|---|---|
| Diameter (Metric) | 33 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Acrylic |
| Material (Membrane) | PES |
| Quantity | 50/Pk. |
| Sterility | Sterile |
Basix™ Syringe Filters, Nylon, Non-Sterile
Attach to the end of syringes and filter contents as it is being forced out. Fisherbrand™ Basix™ Syringe Filters, Nylon, Non-Sterile offers high sample throughput.
| Housing Material | Polypropylene |
|---|---|
| Material (Membrane) | Nylon |
| Sterility | Non-sterile |
Fisherbrand™ Syringe Filters: PTFE Membrane
Low hold-up volume helps you to recover virtually all of your sample after filtering
| Type | Syringe Filter |
|---|---|
| Material | PTFE |
| For Use With (Application) | Ideal for degassing/clarifying aqueous and solvent samples |
Fisherbrand™ Syringe Filters - Sterile
Low hold-up volume helps you to recover virtually all of your sample after filtering
| Type | Syringe Filter |
|---|---|
| Hold up Volume (After Air Purge) | Low |
MilliporeSigma™ Millex™ Syringe Filters, Hydrophilic PTFE, 0.45 μm
Millex™ Hydrophilic PTFE Syringe Filters for removing particulates, reducing signal-to-noise ratios and maintaining flat baselines.
| Pore Size | 0.45 μm |
|---|---|
| Disposable | Single-use |
| Filter Type | Syringe Filter |
| Hydrophobicity | Hydrophilic |
| For Use With (Application) | Analytical sample prep |
| Sterility | Non-sterile |
MilliporeSigma™ Millex™ Syringe Filter, MCE, 0.45 μm
Millex™ MCE Syringe Filter, 0.45 μm for removing particulates, reducing signal-to-noise ratios and maintaining flat baselines.
| Pore Size | 0.45 μm |
|---|---|
| Disposable | Single-use |
| Type | Syringe Filter |
| For Use With (Equipment) | Syringe |
| Diameter (Metric) | 25 mm |
| Housing Material | PVC |
| Diameter (Metric) Filter | 25 mm |
| Volume (Metric) | 100 mL |
| Material | PVC |
| Filter Type | Syringe Filter |
| For Use With (Application) | Analytical sample prep |
| Sterility | Non-sterile |
MilliporeSigma™ Millex™ Syringe Filter, Glass Fiber, 25mm dia.
25 mm diameter, Millex-AP glass fiber membrane, hydrophilic.
MilliporeSigma™ Millex™ Syringe Filter, Durapore™ (PVDF), 0.45 μm
Remove particulates, reduce signal-to-noise ratios and maintain flat baselines. Millex™ Nonsterile 33 mm Syringe Filters are constructed of polyethylene housing with Durapore™ membranes for preparing samples for analysis. Available in two pore sizes.
| Pore Size | 0.45 μm |
|---|---|
| Disposable | Single-use |
| Filter Code | HV |
| Housing Material | Polypropylene |
| Material (Membrane) | PVDF |
| Volume (Metric) | <100 mL |
| Color Code | Yellow |
| For Use With (Application) | Analytical sample prep |
| Sterility | Non-sterile |
| Filtration Area | 4.5 cm2 |
| Type | Syringe Filter |
| Diameter (Metric) | 33 mm |
| Diameter (Metric) Filter | 33 mm |
| Filter Type | Syringe Filter |
| Hold up Volume (After Air Purge) | ≤80 μL |
| Product Line | Millex |
Thermo Scientific™ Target2™ Nylon Syringe Filters
Ensure cleaner sample extracts by removing interfering materials and fine particles prior to injection with these robust nylon syringe filters. Ideal for general HPLC use.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Polypropylene |
| Material (Membrane) | Nylon |
| Quantity | 100/Pk. |
| Certifications/Compliance | Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. |
| For Use With (Application) | HPLC, SPE |
| Sterility | Non-sterile |
| Product Line | Target2 |