Air-Purifying Respirator Cartridges and Filters
Air-purifying respirator cartridges and filters are installed in reusable half-mask or full-facepiece respirators to provide protection from airborne contaminants. Products are designed to protect against a variety of individual contaminants or combinations of contaminants, including dusts, particles, mists, aerosols, fumes, gases, and/or vapors.
Some products protect against both particulate and gaseous contaminants, however, there is no single filter and cartridge combination that protects against all substances.
Correct product selection depends on the environment(s) in which the product will be used and the type(s) of hazard(s) or risk(s) expected in the selected environment(s). NIOSH-rated cartridges and canisters use a color-coding system for secondary identification.
Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details for each filter and filter/cartridge package can be obtained at the individual product level and should be carefully scrutinized during selection.
3M™ 7800S Series Full Facepiece Respirator Accessory, Cartridge Filter Adapter 701
Replacement part for 7800S Series full-facepiece respirators
3M™ 5000 Series Respirator Accessory, Filter Retainer 501
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
3M™ Reusable Respirator Accessory, Filter Adapter 603
Used with 3M™ Particulate Filter 5N11 or 3M™ Particulate Filter 5P71 and 3M™ Filter Retainer 501.
3M™ Mercury Vapor/Organic Vapor/Acid Gas Cartridges/Filters 60927, P100
NIOSH-approved for protection against mercury vapor, chlorine, sulfur dioxide, organic vapor and hydrogen sulfide. NIOSH-approved P100 particulate filter for respiratory protection against certain oil and non-oil based particulates.
3M™ Secure Click™ Filter Retainer
3M™ Secure Click™ Filter Retainer for holding Secure Click™ Particulate Filters
3M™ Secure Click™ Nuisance Level Cartridges and Filters
Secure Click™ nuisance level cartridges and filters are NIOSH-approved for certain oil and non-oil based airborne particulate contaminants when used with 3M™ Secure Click™ facepieces.
3M™ Mercury Vapor/Organic Vapor/Acid Gas Cartridges 6007
NIOSH-approved cartridge for protection against mercury vapor, chlorine, sulfur dioxide, organic vapor and hydrogen sulfide.
3M™ Secure Click™ Cartridges and Filters
Secure Click™ cartridges and filters provide NIOSH-approved respiratory protection and utilize dual flow technology for easier breathing.
Bullard™ 6 Pack of HEPA High Efficient Particulate Filters
6 pack of HEPA High efficient particulate filters suitable for protection against airborne particulate (dust-mists and fumes).
3M™ N95 and P95 Particulate Filters (5000/6000 Series)
NIOSH approved for environments containing certain non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501.
3M™ Versaflo™TR-600 Series Filter Covers
Filter cover for use with TR- 6820N filter
3M™ Filter Adapter 502
Use to attach 3M™ Particulate Filters 2000 Series and 7093 to the 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series for a wide variety of applications.
Dentec Safety™ N95 Respirator Filter Pads
Dentec Safety™ N95 Respirator Filter Pads features an ultra thin design that will fit under any grinding shield or welding helmet.
Dentec Safety™ Retainers for 14494 Pre-Filters
Dentec Safety™ Retainers for 14494 Pre-Filters hold the P100 prefilter to the P100 cartridge
Dentec Safety™ P100 Low Profile Cartridge
Dentec Safety™ P100 Low Profile Cartridge is uniquely designed with a space plenum between the filtering material and the inhalation port