Cleanroom Gloves
Cleanroom gloves are intended for use in cleanrooms and controlled environments, including, but not limited to, microelectronic, semiconductor, biotechnology, pharmaceutical, medical device, laboratory, research, chemical, life sciences, and healthcare. Designed to prevent particulate contamination, cleanroom gloves are manufactured, washed, and packaged in a cleanroom environment and meet stringent industry standards and requirements.
Cleanroom gloves are intended for a single use and are constructed of nitrile, latex, neoprene, polychloroprene, vinyl, or polyisoprene material. They are assigned a class and ISO rating and can be sterile or non-sterile, depending on working conditions. Cleanroom gloves are available in pair-packed, hand-specific, or ambidextrous variations and range from 9 inches to 24 inches in length with 12 inches being the standard length. Sizes range from X-small through 2X-large and are sometimes displayed in numeric form (sizes 5 through 11).
The following criteria must be considered when selecting the appropriate cleanroom gloves:
- Particle count: Refers to the number of particle contaminants that come off the gloves
- Extractable count: Number of elements extracted from the gloves in an immersion test
- Clean class: Gloves are carefully laundered, dried, tested and packaged to ensure the particle count is compatible with the cleanroom environment where they will be used
Regulatory compliance details can be obtained at the individual product level.
- (1)
- (58)
- (8)
- (8)
- (8)
- (56)
- (137)
- (3)
- (6)
- (204)
- (5)
- (5)
- (111)
- (20)
- (304)
- (25)
- (15)
- (20)
- (4)
- (13)
- (2)
- (27)
- (1)
- (5)
- (25)
- (20)
- (26)
- (22)
- (27)
- (23)
- (29)
- (64)
- (1)
- (58)
- (61)
- (57)
- (37)
- (320)
- (174)
- (29)
- (149)
- (269)
- (43)
Filtered Search Results
Kimtech™ G3 Sterile White Nitrile Gloves
Nitrile gloves feature a textured finish and provide enhanced sterile cleanroom protection for a wide range of contaminants in a Class 10/ISO 4 critical environment. Hand-specific pairs of Kimtech™ G3 Sterile White Nitrile gloves are appropriate for workers and technicians in medical device manufacturing, pharmaceuticals, or research labs.
| Disposable | Single-use |
|---|---|
| Length (Metric) | 30.5 cm |
| Chemotherapeutic Rated | Yes |
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Sterile |
| Hand | Specific |
| Finger Thickness (Metric) | 0.15 mm |
| Thickness (Metric) | 0.15 mm |
| Accelerator Free | Yes |
| Series | Kimtech G3 Sterile |
| Certifications/Compliance (Europe) | EN ISO 374-1:2016; EN 374-4:2003; EN ISO 374-5:2016 |
| Product Type | Controlled Environment Gloves |
| Cleanroom Class | Class 10 (ISO 4) |
| Latex Free | Yes |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | ASTM D5151,ASTM D412,ASTM D573,ASTM D3767,ASTM D3577,ASTM D3767,ASTM D6319,IEST-RP-CC005,ASTM D6978-05 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.13 mm |
TechNiGlove International STN200P Series Class 100/ISO 5 Sterile Nitrile Gloves
Pair-packed, sterile, nitrile cleanroom gloves meet requirements for USP 797/800 and are tested for use with Chemotherapy Drugs.
| Tensile Strength | 12.5 MPa |
|---|---|
| Disposable | Single-use |
| Chlorinated | Yes |
| Length (Metric) | 30.5 cm |
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.15 mm |
| Thickness (Metric) | 0.12 mm |
| Accelerator Free | Yes |
| Series | STN200P Series |
| Product Type | Controlled Environment Gloves |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | USP 797/800,ASTM D6978-05 |
| Manufacturing/QMS Audit Standards | ISO9001:2000 and ISO14001:2004 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.12 mm |
TechNiGlove International STN1000 Series Class 100/ISO 5 White Sterile Nitrile Gloves
Bulk packed, sterile 12 in. nitrile cleanroom gloves are sterilized by gamma irradiation to meet AAMI and ASTM standards.
| Tensile Strength | 12.9 MPa |
|---|---|
| Disposable | Single-use |
| Length (Metric) | 30.5 cm |
| Packaging Type | Cleanroom Bagged |
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.15 mm |
| Thickness (Metric) | 0.12 mm |
| Accelerator Free | Yes |
| Series | STN1000W Series |
| Product Type | Controlled Environment Gloves |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | AAMI/ASTM |
| Manufacturing/QMS Audit Standards | ISO9001:2000 and ISO 14001:2004 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.12 mm |
Ansell AccuTech™ 91-225 Sterile Latex Cleanroom Gloves
Thick, clean, and sterile latex with a hand-specific design for comfort and dexterity. Recommended for Class 100/ISO 5 cleanroom environments.
| Tensile Strength | 24 MPa |
|---|---|
| Disposable | Single-use |
| Chlorinated | Yes |
| Grip Design | Smooth |
| Length (Metric) | 30 cm |
| Chemotherapeutic Rated | No |
| Coating Material | Latex |
| Color | Natural |
| Length (English) | 11.8 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Sterile |
| Hand | Specific |
| Finger Thickness (Metric) | 0.23 mm |
| Thickness (Metric) | 0.23 mm |
| Accelerator Free | No |
| Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009, EN 556, EN ISO 374-1:2016, EN ISO 374-5:2016 |
| Product Type | Cleanroom Gloves |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | No |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | 21 CFR 820 Quality System Regulations,AS/NZS 4179,ASTM D3577,ASTM D7160 |
| AQL | 1 |
| Glove Cuff Style | Straight |
| Palm Thickness (Metric) | 0.23 mm |
MAPA™ AdvanTech TRIonic™ Orange Tripolymer Controlled Environment Gloves, Pair Packed
Orange, powder free gloves are packaged in pairs and feature a diamond grip pattern. Tripolymer blend of nitrile, neoprene, and natural rubber provide comfort and durability with chemical and abrasion resistance. Recommended for Class 10/ ISO Class 4 critical environments.
| Thickness (Metric) | 0.50 mm |
|---|---|
| Series | AdvanTech TRIonic™ |
| Certifications/Compliance (Europe) | EN 388:2016, EN ISO 374-1:2016, EN ISO 374-5:2016 |
| Length (Metric) | 36 cm |
| Color | Orange |
| Cleanroom Class | Class 10 (ISO 4) |
| Length (English) | 14 in. |
| Latex Free | No |
| Material | Tripolymer |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | ASTM D3577,ASTM F739,ASTM D471,21 CFR 170-199 |
| Sterility | Non-sterile |
Ansell BioClean™ Legion BLA3 Latex Cleanroom Gloves
Non-sterile, latex gloves with textured grip offer comfort, flexibility and 16 in. elbow-length protection. Recommended for Class 100/ISO 5 critical environments.
| Length (Metric) | 40 cm |
|---|---|
| Color | Natural |
| Length (English) | 16 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.20 mm |
| Thickness (Metric) | 0.20 mm |
| Series | BioClean™ Legion BLA3 |
| Certifications/Compliance (Europe) | CE 0598, EN 420:2003 + A1:2009, EN 421:2010, EN 455 Part 2, EN ISO 374-1:2016, EN ISO 374-5:2016, Category III |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | No |
| Exterior Finish | Fully Textured |
| Manufacturing/QMS Audit Standards | ISO 9001, PPE Regulation 2016 425 Module D |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.17 mm |
Ansell TouchNTuff™ 93-300 Clean Nitrile Gloves
Non-sterile, clean nitrile gloves are compatible with Class 100 (ISO 5) controlled environments. Disposable gloves offer three times the puncture and tear resistance of standard latex gloves.
| Length (Metric) | 30 cm |
|---|---|
| Color | Green |
| Length (English) | 11.8 in. |
| Material | Nitrile |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.16 mm |
| Thickness (Metric) | 0.16 mm |
| Series | TouchNTuff™ 93-300 |
| Certifications/Compliance (Europe) | Category III, EAC TP TC 019:2011, EN 420:2003 + A1:2009, EN ISO 374-1:2016, EN ISO 374-5:2016, EN421:2010 |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | ASTM D6319,FDA 21 CFR 177.2600,ISO 13485,ISO 14001 |
| Manufacturing/QMS Audit Standards | ISO 9001:2015 |
| Palm Thickness (Metric) | 0.13 mm |
TechNiGlove International TN1000 Series Class 100/ISO 5 Nitrile Gloves
Nitrile 12 in. cleanroom gloves are double bagged and are suitable for use in pharmaceutical and biotech manufacturing.
| Disposable | Single-use |
|---|---|
| Chlorinated | Yes |
| Length (Metric) | 30.5 cm |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.15 mm |
| Thickness (Metric) | 0.12 mm |
| Accelerator Free | Yes |
| Product Type | Controlled Environment Gloves |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.12 mm |
Ansell Nitrilite™ 93-401 Nitrile Cleanroom Gloves
Non-sterile cleanroom gloves feature dexterity, comfort, and long wear potential. Designed for use in Class 10 (ISO 4) cleanroom environments.
| Disposable | Single-use |
|---|---|
| Chlorinated | Yes |
| Length (Metric) | 30 cm |
| Chemotherapeutic Rated | Yes |
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.13 mm |
| Thickness (Metric) | 0.13 mm |
| Accelerator Free | Yes |
| Series | Nitrilite™ 93-401 |
| Certifications/Compliance (Europe) | Category III, EN 420:2003 + A1:2009, EN ISO 374-1:2016, EN ISO 374-5:2016 |
| Product Type | Controlled Environment Gloves |
| Cleanroom Class | Class 10 (ISO 4) |
| Model | 93-401 |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | FDA 21 CFR 177.2600 |
| Manufacturing/QMS Audit Standards | ISO 9001:2015 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.11 mm |
Ansell BFAP BioClean™ Fusion Polychloroprene Cleanroom Gloves
Non-sterile, polychloroprene gloves feature high tactility and comfort. Ultra clean gloves are antistatic, double donnable and suitable for Class 10/ ISO 4 cleanrooms.
| Length (Metric) | 30.5 cm |
|---|---|
| Color | Green |
| Length (English) | 12 in. |
| Material | Polychloroprene |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.12 mm |
| Thickness (Metric) | 0.12 mm |
| Series | BioClean™ Fusion |
| Certifications/Compliance (Europe) | EN420:2003, EN374-1, 2 & 3:2003, EN455-2:2009 |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | ISO 11137-1:2006 |
| Manufacturing/QMS Audit Standards | ISO 9001: 2008 and 89/686/EEC |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.10 mm |
Ansell BioClean™ Nerva BNAL Extra Long Nitrile Cleanroom Gloves
Nitrile 16 in. elbow length gloves are resistant to a range of chemicals and reduce the risk of cross contamination.
| Length (Metric) | 40 cm |
|---|---|
| Color | White |
| Length (English) | 16 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.16 mm |
| Thickness (Metric) | 0.16 mm |
| Series | BioClean™ Nerva BNAL |
| Certifications/Compliance (Europe) | EN 420:2003 + A1:2009, EN 421:2010, EN 455 Part 2, EN ISO 374-1:2016, EN ISO 374-5:2016, Category III |
| Cleanroom Class | Class 10 (ISO 4) |
| Latex Free | Yes |
| Exterior Finish | Fully Textured |
| Manufacturing/QMS Audit Standards | ISO 9001, PPE Regulation 2016 425 Module D |
| Palm Thickness (Metric) | 0.10 mm |
Kimtech™ Pure G3 White Cleanroom Nitrile Gloves
White, non-sterile gloves offer a comfortable fit, smooth finish, dexterity and tactile sensitivity. Kimtech™ Pure G3 White Cleanroom Nitrile Gloves recommended for ISO Class 4 or higher cleanroom environments.
| Disposable | Single-use |
|---|---|
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.15 mm |
| Thickness (Metric) | 0.15 mm |
| Accelerator Free | Yes |
| Series | Kimtech™ Pure G3 |
| Product Type | Controlled Environment Gloves |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Palm Thickness (Metric) | 0.13 mm |
Kimtech™ Pure G3 Sterile Latex Gloves
Sterile, hand-specific latex gloves are suitable for double-donning and provide sensitive protection. Kimtech™ Pure G3 Sterile Latex Gloves recommended for Class 10/ISO 4 or higher cleanrooms.
| Tensile Strength | 24 MPa |
|---|---|
| Length (Metric) | 30.5 cm |
| Color | Natural |
| Length (English) | 12 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Sterile |
| Hand | Specific |
| Finger Thickness (Metric) | 0.22 mm |
| Thickness (Metric) | 0.20 mm |
| Accelerator Free | Yes |
| Series | Kimtech Pure G3 |
| Certifications/Compliance (Europe) | EN ISO 374-1:2016, EN 374-4:2003, EN ISO 374-5:2016 |
| Product Type | Cleanroom Gloves |
| Cleanroom Class | Class 10 (ISO 4) |
| Latex Free | No |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | ASTM D3577,ASTM D5151,ASTM D412,ASTM D573,ASTM D3767,ASTM D6319,IEST-RP-CC005,ASTM D5712 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.20 mm |
Kimtech™ G3 Non-Sterile Latex Cleanroom Gloves
G3 non-sterile latex gloves provide enhanced tactile sensitivity and performance. Recommended for Class 10/ISO 4 critical environments.
| Disposable | Single-use |
|---|---|
| Length (Metric) | 30.5 cm |
| Color | Natural |
| Length (English) | 12 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.22 mm |
| Thickness (Metric) | 0.20 mm |
| Accelerator Free | Yes |
| Series | Kimtech™ Pure G3 |
| Certifications/Compliance (Europe) | Cat III according to (EU) 2016/425, EN ISO 374-1:2016, EN 374-4:2014, EN ISO 374-5:2016 |
| Product Type | Controlled Environment Gloves |
| Cleanroom Class | Class 10 (ISO 4) |
| Latex Free | No |
| Exterior Finish | No Texture |
| Certifications/Compliance | ASTM D3578,IEST-RP-CC005.2 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.20 mm |
Ansell MICROFLEX™ CE5 System™ Nitrile Gloves
Exceptional dexterity, tactile sense, fit, feel and comfort.
| Length (Metric) | 30.5 cm |
|---|---|
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Exterior Finish | Partially Textured |
| Sterility | Non-sterile |
| Hand | Ambidextrous |