Chromatography Fittings
MilliporeSigma™ Supelco™ Tube Fitting, Cheminert™ 1/4-28 male UNF (includes washer)
Fittings and washers included. Chemically inert. Zero dead volume, small bore. Autoclavable. 500 psi (35 kg/cm3) pressure rating
MilliporeSigma™ Supelco™ SPE Tube Adapter
Tube adapters serve many purposes. They can be used to stack one SPE tube on top of another to provide different selectivities. A larger empty syringe barrel can be stacked on top of a smaller SPE tube to act as a larger load reservoir. Or, they can serve as an adapter for positive pressure methods.
MilliporeSigma™ Supelco™ Swagelok™ Fine Metering Valve Stainless Steel, straight arms 1/16 in.
Use for very accurate flow regulation. Install a flow measuring device downstream. Nuts and ferrules included. An optional vernier handle (Cat. No. 22122, order separately) is available for added convenience.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Short Design, 0.10-0.25 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Supeltex™ M-2 Double-Tapered Ferrule, 0.32 mm I.D. to 0.53 mm I.D. Column
Max. Temp.: 350°C. Composition: DuPont VESPEL SP-1 (100% polyimide). Characteristics: High reusability.
MilliporeSigma™ Supelco™ Swagelok™ Connector to Male NPT Brass, 1/4 in., 1/8 in. male NPT, 400-1-2
Nuts and ferrules included.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, Short Design, 0.53 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Swagelok™ Fine Metering Valve Brass, angle arms 1/8 in.
Use for very accurate flow regulation. Install a flow measuring device downstream. Nuts and ferrules included. An optional vernier handle (Cat. No. 22122, order separately) is available for added convenience.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, General Purpose, 0.53 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass.Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Swagelok™ Tee Wrench 1/4 in.
Made specifically for 1/4 in.. Swagelok™ union tees and crosses.
MilliporeSigma™ Supelco™ Waters™ Fittings size 1/16 in.
Waters™ Fittings are used for connecting most HPLC columns to a 1/16 in. tubing system.
MilliporeSigma™ Supelco™ Supeltex™ M-4 Capillary Ferrule, Long Design, 0.10-0.25 mm Column I.D.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Reducing Ferrule, Column in 1/4 in. fitting
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C