Chromatography Fittings
Honeywell Burdick & Jackson™ SSPDS Solvent Dispensing Toggle Valve with Swivel
Toggle Valve with Swivel
MilliporeSigma™ Supelco™ GlasSeal™ Capillary Column Connector, Borosilicate Glass
Column connectors are useful for attaching a guard column/retention gap to an analytical column, or for repairing a broken column.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Reducing Ferrule, Column in 1/8 in. fitting
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Supeltex™ M-4 Capillary Ferrule, General Purpose, 0.10-0.25 mm Column I.D.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Rheodyne™ Fittings long Nut for 1/16 in. Tubing
The long Rheodyne™ nut has a longer hex portion for easier wrench access.
MilliporeSigma™ Supelco™ Waters™ Fittings size 1/16 in.
Waters™ Fittings are used for connecting most HPLC columns to a 1/16 in. tubing system.
MilliporeSigma™ Supelco™ PEEK Fitting One-Piece Fingertight
Biocompatible fittings for all 1/16 in. tubing connections.
MilliporeSigma™ Supelco™ Long Stem Flow Control Valves
Equip alternative valves in your 12-port or 24-port standard Visiprep vacuum manifold with these long stem flow control valves if you intend to use all ports of the manifold with 12, 20, or 60 mL SPE tubes. Note: Not for use with Visiprep DL (Disposable Liner) models
MilliporeSigma™ Supelco™ Swagelok™ On/Off Throttling Valve, Stainless Steel
Nuts and ferrules included.
MilliporeSigma™ Supelco™ Swagelok™ Bulkhead Union, 400-61, Stainless Steel, 1/4 in.
Nuts and ferrules included.
MilliporeSigma™ Supelco™ Swagelok™ Reducing Union, 400-6-1, Stainless Steel, 1/4 in., 1/16 in.
Nuts and ferrules included.
MilliporeSigma™ Supelco™ On/Off Throttling Valve, Brass
Nuts and ferrules included.
MilliporeSigma™ Supelco™ Supeltex™ M-4 Packed Column Ferrule, 1/16 in.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Swagelok™ Union Cross, 400-4, Brass, 1/4 in.
Union cross generally divides the eluent flow into three directions which is coming from the pump. In gas system, pure gases from mass flow controllers are converged at the union cross and in turn flow into different size tubing to generate turbulence which produce homogenized gas.