Chromatography Fittings
MilliporeSigma™ Supelco™ Swagelok™ Tee Wrench 1/4 in.
Made specifically for 1/4 in.. Swagelok™ union tees and crosses.
MilliporeSigma™ Supelco™ Supeltex™ M-4 Capillary Ferrule, Short Design, 0.32 mm Column I.D.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, General Purpose, 0.10-0.25 mm Column I.D. (2-hole)
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass.Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Supeltex™ M-2 Double-Tapered Ferrule, 0.32 mm I.D. to 0.53 mm I.D. Column
Max. Temp.: 350°C. Composition: DuPont VESPEL SP-1 (100% polyimide). Characteristics: High reusability.
MilliporeSigma™ Supelco™ Swagelok™ Reducing Union, 400-6-1, Stainless Steel, 1/4 in., 1/16 in.
Nuts and ferrules included.
MilliporeSigma™ Supelco™ SPE Tube Adapter configured for AutoTrace Automated Systems
Tube adapters serve many purposes. They can be used to stack one SPE tube on top of another to provide different selectivities. A larger empty syringe barrel can be stacked on top of a smaller SPE tube to act as a larger load reservoir. Or, they can serve as an adapter for positive pressure methods.
MilliporeSigma™ Supelco™ Supeltex™ M-2 Packed Column Ferrule, 1/4 in.
Characteristics: High reusability.Material Composition: DuPont VESPEL SP-1 (100% polyimide)Maximum Temperature: 350°C
MilliporeSigma™ Supelco™ Supeltex™ M-2A Packed Column Ferrule, 1/4 in.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Shortix™ Tubing Cutter
Correct fitting of a ferrule is very important in column performance.
MilliporeSigma™ Supelco™ Supeltex™ M-2A Capillary Ferrule, General Purpose, 0.10-0.25 mm Column I.D.
Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass.Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite). Maximum Temperature: 400°C
MilliporeSigma™ Supelco™ Swagelok™ Fine Metering Valve Brass, angle arms 1/8 in.
Use for very accurate flow regulation. Install a flow measuring device downstream. Nuts and ferrules included. An optional vernier handle (Cat. No. 22122, order separately) is available for added convenience.
MilliporeSigma™ Supelco™ Swagelok™ Reducing Union, 400-6-2, Stainless Steel, 1/4 in., 1/8 in.
Reducing unions of Swagelok™™ type are mostly suitable as metal column terminators.
MilliporeSigma™ Supelco™ Valco™ Pre-Column Filter Frit Filter, size 1/8 in., pore size 0.5 m
In-line installation. Efficient, low dead volume filters protect your columns from particles without reducing column performance.