Labconco™ Purifier™ Cell Logic™+ Class II A2 Biosafety Cabinets with Temp-Zone and Base Stand, International Models

Description

All models feature:

• Electronically Commutated Motor (ECM)
• Constant Airflow Profile (CAP) airflow monitoring system
• Intrinsically-safe negative pressure design
• Air-Wave™ Entry System
• Contain-Air™ Negative Pressure Channel
• Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available
• Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available
• Bright, 90 to 150 footcandle, glare-free LED lighting located outside the contaminated work area
• Fully-closing, clear 1/4 in. tempered safety glass sash
• Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
• Two electrical duplex receptacles. Flush-mounted-stainless steel with dampened hinges. Single outlets on 230 V models. One outlet on each side, with ground fault interruption (115 V)
• Smart-Start™ System user-programmable start up and shut down
• Night-Smart™ System reduces blower speed when sash is closed
• Leak-tight stainless steel interior and powder-coated steel exterior
• Removable towel catch located under work surface
• Code-activated electronic security lock
• 22.6 in. (57 cm) max. sash opening and 27 in. (69 cm) viewing height
• 10° Angled sash with counterbalanced, easy lift mechanism
• ADA-Compliant touchpad control on right side post
• Noise level <63 dBA
• Heat load 990 BTU/hour (4 ft. models)
• Removable, seamless type 304 stainless steel, dished work surface with lift out knobs
• Temp-Zone™ Package consisting of temperature-controlled work area, 10.5 in. (27 cm) wide x 12.0 in. (30 cm) deep (7 x 12 in. on 3 ft. models) located on the left side of the work surface. Circulator is required (not included). Circulator requirements: minimum flow rate of 0.4 to 0.5 GPM (1.5 to1.9 LPM), typical volume of 6 liters, and temperature of 0 to 50° C (chiller/heater)
• Nominal inflow velocity of 105 fpm (0.5 m/sec)
• Nominal downflow velocity of 55 fpm (0.3 m/sec)
• Approximately 70% air recirculation
• Overall depth x height: 31.2 x 61.7 in. (79.2 x 156.7 cm)
• 10 ft. (3 m) power cord with plug
• Built-in timer and digital clock
• Five year warranty
• NSF International compliant
• Optional NSF-approved non-welded telescoping base stand included on some models
• Optional Accessory Package (254 nm UV lamp, ADA-compliant service fixture(s) with ball-type valve(s), and NSF-Approved Vacu-Pass™ Cord & Cable Portal) included on some models
• All models require supporting base if non-welded stand option is not selected