Syringeless and Syringe Filters
- (8)
- (13)
- (297)
- (9)
- (91)
- (1)
- (408)
- (1)
- (14)
- (16)
- (2)
- (3)
- (20)
- (1)
- (16)
- (1)
- (2)
- (5)
- (2)
- (1)
- (3)
- (3)
- (26)
- (3)
- (9)
- (1)
- (2)
- (9)
- (72)
- (3)
- (17)
- (1)
- (4)
- (37)
- (1)
- (19)
- (2)
- (133)
- (99)
- (2)
- (98)
- (1)
- (43)
- (53)
- (109)
- (27)
- (4)
- (2)
- (1)
- (8)
- (4)
- (3)
- (8)
- (63)
- (26)
- (593)
- (151)
- (11)
- (494)
- (21)
- (32)
- (13)
- (22)
- (189)
Filtered Search Results
| Outlet Style | Male Leur-Slip |
|---|---|
| Diameter (Metric) | 33 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Acrylic |
| Material (Membrane) | PES |
| Quantity | 50/Pk. |
| Sterility | Sterile |
Choice™ Nylon Syringe Filters
Use Thermo Scientific™ Choice™ Nylon Syringe Filters as the economic option for most general laboratory filtration, and for filtration of most HPLC samples.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Solvent Resistent, Low-Extractable Polypropylene |
| Material (Membrane) | Nylon |
| Quantity | 100/Pk. |
| Pressure Rating | 90 psi |
| For Use With (Application) | HPLC, SPE |
| Prefilter | No |
| Sterility | Non-sterile |
| Product Line | Choice |
Choice™ Polypropylene (PP) Syringe Filters
Use Choice Polypropylene Syringe Filters as an economic solution to filtration of biological samples, and for filtration of aggressive organic solutions.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Solvent Resistent, Low-Extractable Polypropylene |
| Material (Membrane) | Polypropylene (Hydrophilic) |
| Quantity | 100/Pk. |
| Pressure Rating | 90 psi |
| Material | Polypropylene |
| For Use With (Application) | HPLC, SPE |
| Prefilter | No |
| Sterility | Non-sterile |
| Product Line | Choice |
Thermo Scientific™ Titan3™ GMF (Glass MicroFiber) Syringe Filters
Ensure cleaner sample extracts by removing interfering materials and fine particles prior to injection with these robust GMF (glass microfiber) syringe filters.
| Disposable | Single-use |
|---|---|
| Housing Material | Polypropylene |
| Material (Membrane) | Glass Microfiber |
| Volume (Metric) | <137 μL (Hold Up) |
| Quantity | 100 Pk. |
| Pressure Rating | 210 psi |
| For Use With (Application) | Sample Filtration: dissolution testing; general use |
| Sterility | Non-sterile |
| Type | Syringe Filter |
| Diameter (Metric) | 30 mm |
| Filter Type | Syringe Filter |
| Certifications/Compliance | Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. |
| Prefilter | No |
| Hold up Volume (After Air Purge) | <157 μL |
| Product Line | Titan3 |
MilliporeSigma™ Millex™ Syringe Filter, Fluoropore™ PTFE, Hydrophobic, 0.2 μm
For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines
MilliporeSigma™ Millex™-VV Sterile Syringe Filter Unit, PVDF, 0.1 μm
Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0μm pore sizes
MilliporeSigma™ Millex™ Syringe Filter, Fluoropore™ PTFE, Hydrophobic, 0.2 μm
Millex™ Syringe Filters for removing particulates, reducing signal-to-noise ratios and maintaining flat baselines.
MilliporeSigma Millex Hydrophobic PTFE Syringe Filter
0.2 μm pore size for sterile filtration of gases or organic liquids
MilliporeSigma™ Millex™-LG Syringe Filter, 0.20μm, Hydrophilic PTFE
Features a hydrophilic PTFE membrane. MilliporeSigma™ Millex™-LG Syringe Filter, 0.20μm, Hydrophilic PTFE is used in non-sterile filtration to remove low protein binding fine particles from aqueous and organic solutions. These filters are recommended for filtration prior to instrumentation analysis.
MilliporeSigma™ Millex™ Syringe Filter, Hydrophilic PTFE, 0.2 μm
For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines
MilliporeSigma Dualex Ultra Transducer Protector
0.22 μm pore size for sterile gas filtration or venting
MilliporeSigma™ Millex™ Syringe Filter, Durapore™ (PVDF), 0.45 μm
Remove particulates, reduce signal-to-noise ratios and maintain flat baselines. Millex™ Nonsterile 33 mm Syringe Filters are constructed of polyethylene housing with Durapore™ membranes for preparing samples for analysis. Available in two pore sizes.
| Pore Size | 0.45 μm |
|---|---|
| Disposable | Single-use |
| Filter Code | HV |
| Housing Material | Polypropylene |
| Material (Membrane) | PVDF |
| Volume (Metric) | <100 mL |
| Color Code | Yellow |
| For Use With (Application) | Analytical sample prep |
| Sterility | Non-sterile |
| Filtration Area | 4.5 cm2 |
| Type | Syringe Filter |
| Diameter (Metric) | 33 mm |
| Diameter (Metric) Filter | 33 mm |
| Filter Type | Syringe Filter |
| Hold up Volume (After Air Purge) | ≤80 μL |
| Product Line | Millex |