Supports for Flasks, Cylinders and Apparatus

Bel-Art™ SP Scienceware™ Round Lead Ring Flask Weights with Vikem™ Vinyl Coating

Protects and stabilizes expensive glassware. SP Scienceware™ Round Lead Ring Flask Weights with Vikem™ Vinyl Coating reduces floating, breakage and chemical spills.

Fisherbrand™ Covered Lead Rings for Flasks

Protect and stabilize expensive glassware with these Vikem™ vinyl-coated lead rings.

Fisherbrand™ Lab Jacks

Precise height adjustment with the turn of a knob.

GSC Aluminum Lab Jack

GSC Aluminum Lab Jack provide a helpful platform for use in the lab. Can be raised and lowered as needed via the knob on the side to a full height of approximatley 275mm

Lecture Bottle Stand and Carrier

Keep cylinders safe and secure.

Bel-Art™ C-Shaped Lead Rings for Flasks

Fit neatly around flasks with sidearm tubing connections. Bel Art C-Shaped Lead Rings for Flasks are available in four diameter/weight combinations.

Fisherbrand™ Flexaframe™ Support Rods for Custom Frames

Hard aluminum rods exactly 0.5 in. diameter (13mm) for smooth fit with Flexaframe lattice

Fisherbrand™ Flexaframe™ Castaloy™ Hook Connector

Locks two Flexframe rods at a 90° angle

Fisherbrand™ Flexaframe™ Connector for Rod Ends

Holds Flexaframe rods firmly at 90° angle

Bel-Art™ SP Scienceware™ Wire Lead Flask with Vikem™ Coating

“Wire” lead weights coil into a helix, spiral, cone or any irregular shape to stabilize vessels in a water bath

Fisherbrand™ Flexaframe™ Multiclutch Connectors

Permit lattice adjustment after construction

Fisherbrand™ Flexaframe™ Foot Plate

Mounts lattice permanently

Fisherbrand™ Flexaframe™ Vertical Mounting Supports

Great for glassware setups, etc., in small laboratories

Fisherbrand™ Round Covered Lead Flask Rings

Stabilize Erlenmeyer flasks immersed in water baths.

Fisherbrand™ Flexaframe™ End-to-End Rod Connector

Strong aluminum alloy connector permits end-to-end joining of rods

Bel-Art™ SP Scienceware™ Flaskup™ Flask Holders

With slight taper on the inside wall which allows a variety of different size round bottom flasks to fit into one holder

Fisherbrand™ Flexaframe™ Horizontal or Vertical Mounting Supports

Can be assembled as 48L x 24 in. H (122 x 61cm) horizontal frame or 24L x 48 in. H (61 x 122cm) vertical

Bel-Art™ Round Lead Rings With Vikem™ Vinyl Coating

Protects and stabilizes expensive glassware. Bel Art™ Round Lead Rings With Vikem™ Vinyl Coating are safe for use with fragile laboratory glassware.

Fisherbrand™ Flexaframe™ Large-Capacity Supports

Excellent for complex glassware setups

Bel-Art™ SP Scienceware™ Lattice Support Stand

Provides maximum capacity of small lightweight items such as glassware and heavy items such as mechanical stirrers

Bel-Art™ SP Scienceware™ Tissue Culture Flask Racks

Prevent the “domino effect” of flasks tipping one over the other

Bel-Art™ SP Scienceware™ Vinyl-Coated Lead Rings

Stabilizes expensive glassware. Bel Art™ SP Scienceware™ Vinyl-Coated Lead Rings will not scratch flasks.

Bel-Art™ SP Scienceware™ Poly-Jaque™ Lab Jack

The smooth, easy-to-clean top plate supports gradient makers, hot plates, flasks, beakers, baths and other lab items up to ten times its own weight

Fisherbrand™ Gas Cylinder Support

Keeps cylinders upright and safe

Bel-Art™ SP Scienceware™ Horizontal Lattice Support Rod

For use with Bel-Art clamps (Cat. No. 03-422-217 and 03-422-216) and Lattice Support Stand (03-422-215)

BrandTech™ Support Jacks

Available in anodized aluminum (blue) or epoxy-powder-coated aluminum (green) decks

BrandTech™ BOCHEM™ Stainless-Steel Support Jacks

Ideal for use in a wide variety of environments including fume hoods, solution baths, marine and industrial labs

  spinner