Labconco™ Fiberglass 30 Fume Hood

Description

Designed for small working spaces—footprint is just 30 in. (76.2cm) square. Mount safely on base cabinet or stand, lab cart or benchtop (available separately).

 

• Corrosion-resistant, direct-drive exhaust blower built in on 16-315 and 16-319; maximum external static pressure of 0.12 in.H₂O at 310cfm (100fpm)
• Static pressure loss for 16-317 (designed for use with remote blower, not included) does not exceed 0.14 in.H₂O
• Pivoting air foil
• Pre-set baffle with flame spread index less than 25 per ASTM™ E-84
• Sash opens 20 in. (50.8cm), provides viewing height of 28 in. (71.1cm)
• 0.188 in. (0.48cm) thick tempered safety glass vertical-rising sash with epoxy-coated aluminum handle
• 6.688 in. I.D. (17cm) exhaust collar
• One-piece molded fiberglass liner
• Fixture panel accepts up to three service fixtures, one electrical duplex and one airflow monitor (sold separately)
• Prewired light and blower switches (except on Explosion-proof model, to conform with local codes)
• Explosion-proof model (16-319) features factory-installed 1/4hp explosion-proof blower approved for Class I, Group D, and Class II, Groups E, F, and G
• LED lighting

 

Order Info

W x L: 30 x 30 1/8 in. (76.2 x 76.5cm). For 115V 60Hz. Contact your Fisher Scientific Customer Service Representative for information about optional fixtures and models with international electrical configuration.

Certifications

ETL listed

Compliance

Conform to SEFA 1-2005, NFPA 45-204, ASTM™ E-84-01, ASHRAE™ 110-95, ANSI™ Z9.5-2003, UL 3101-1/61010-1, CAN/CSA C22.2, UL 1805

†At 100fpm face velocity (310cfm).
‡Remote blower required (available separately).