UserName
Absolutely. Positively. Precise. Troemner is a leading supplier of mass standards, high precision calibration weights, scale weights, and test weights. Our calibration weights are ISO/IEC 17025 accredited, and available in ASTM, OIML, and NIST weight classes with uncertainties among the lowest in the industry. Troemner also manufactures LabJaws laboratory clamps, one of the most trusted brands in labs across the world.
Variable speed, analog control that allows low rpm start-up for gentle shaking or high-speed mixing for vigorous vortexing of samples.
Shipping Weight (Metric) | 4.5 kg |
---|---|
Height (Metric) | 12.7 cm |
Width (English) | 4.75 in. |
Length (Metric) | 20.2 cm |
Orbit | 4.9 mm |
Controller Type | Analog, 3-way Power Switch |
Wattage | 135 W |
Operating Modes | Touch |
Width (Metric) | 12.1 cm |
Dimensions (L x W x H) | 7.97 x 4.75 x 5 in. (20.2 x 12.1 x 12.7 cm) |
Product Type | Vortex Mixer |
Model | Analog Vortex Mixer |
Weight (English) | 10 lb. |
Certifications/Compliance | CE, TUV |
Shipping Weight (English) | 10 lb. |
Weight (Metric) | 4.5 kg |
Height (English) | 5 in. |
Includes | 50-place Foam rack, one tray pad set, 92 in. detachable three-wire cord and plug |
---|---|
Shipping Weight (Metric) | 19 kg |
Height (Metric) | 40.6 cm |
No. of Positions | 50 |
Width (English) | 15 in. |
Length (Metric) | 23.5 cm |
Orbit | 3.6 mm |
Product Type | Multi-Tube Vortexer |
Length (English) | 9.25 in. |
Shipping Weight (English) | 42 lb. |
Width (Metric) | 28.1 cm |
Speed Range | 500 to 2500 rpm |
Height (English) | 16 in. |
Two rod holders with center swivel capacity allow tilting of clamps at any angle in parallel planes.
For holding apparatus near lab frame where no adjustment is required after set-up.
For suspension of electrodes over beaker during potentiometric titrations
Corrosion resistant hard aluminum rods for smooth fit with lab frames.
Product Type | Corrosion resistant with chamfered ends for easy location |
---|---|
Material | Aluminum |
Includes | 50-place Foam rack, one tray pad set, 92 in. detachable three-wire cord and plug |
---|---|
Shipping Weight (Metric) | 19 kg |
Height (Metric) | 40.6 cm |
No. of Positions | 50 |
Width (English) | 15 in. |
Length (Metric) | 24.1 cm |
Orbit | 3.6 mm |
Product Type | Multi-Tube Vortexer |
Length (English) | 9.5 in. |
Shipping Weight (English) | 42 lb. |
Width (Metric) | 38.1 cm |
Speed Range | 1200 to 2500 rpm |
Height (English) | 16 in. |
For holding glass tubes and thermometers 114mm (4.49 in. ) from support rod.
Shipping Weight (Metric) | 5.3 kg |
---|---|
Height (Metric) | 12.7 cm |
Width (English) | 4.75 in. |
Length (Metric) | 20.2 cm |
Orbit | 4.9 mm |
Wattage | 135 W |
Width (Metric) | 12.1 cm |
Includes | Includes both cup head and 3 in. head with cover. Units are supplied with a 72 in. (183cm), 3-wire cord and plug. |
Product Type | Digital Vortex Mixer |
Warranty and Service Offering | 5 year limited warranty on parts and labor. |
Weight (English) | 10 lb. |
Shipping Weight (English) | 10 lb. |
Speed Range | 500 to 3000 rpm |
Weight (Metric) | 4.5 kg |
Height (English) | 5 in. |
For holding glass tubing, thermometers and thermocouples up to 178mm (7 in. ) from support rod.
Connector with side and front 13mm holes that allow creation of variety of configurations.
Over-sized, sure-grip adjustment knobs provide extra leverage for easy height adjustments.
Product Type | Lab lift |
---|---|
Material | Stainless Steel |
Autoclavable | Autoclavable |