Thermo Scientific™ Slide-A-Lyzer™ 10K MWCO Dialysis Cassettes
Remove buffer salts and contaminants and maximize sample recovery using this semi-permeable membrane with a 10000-dalton protein MW cut-off (MWCO).
Manufacturer: Thermo Scientific™ PI66380
Thermo Scientific™ Slide-A-Lyzer Dialysis Cassettes (10K MWCO) facilitate simple and effective removal of buffer salts and small contaminants from proteins and other macromolecules that are larger than 10,000 daltons.Available in four different cassette sizes to accommodate sample volumes between 0.1 and 30mL, these devices are easier to use than traditional dialysis tubing, providing both faster buffer exchange and more complete sample recovery. Slide-A-Lyzer Cassettes can be used for a wide range of applications including low molecular-weight contaminant removal, buffer exchange, desalting, equilibrium dialysis, and sample concentration.
The cassettes are constructed from two sheets of low-binding, regenerated-cellulose dialysis membrane that are hermetically sealed on either side of a silicone-like gasket inside an inert plastic frame. The membrane and cassette materials are compatible with most common laboratory chemicals and buffers. Liquid samples are easily added and removed by penetrating the self-sealing gasket with a hypodermic needle attached to a syringe. No knots, clips or caps are needed to seal the units and prevent leaking and sample-loss during the dialysis procedure.
Easy to use – no knots or clamps are needed; just inject sample into cassette and begin dialysis
Fast dialysis – flat cassette chamber with two membranes provides high surface-area to volume ratio that maximizes diffusion rate compared to cylindrical dialysis tubing
High recovery – rectangular cassette design maximizes recovery of entire sample volume via any one of the four corner injection ports
Four cassette sizes – select the cassette that best suits your sample volume
Color-coded – orange cassette frame specifies cassettes with the 10,000 MW pore size membrane
10K Dialysis Membrane Specifications:
- Composition: Regenerated cellulose synthesized by the Viscose method; 21% glycerol, 0.05% sulfur, Trace heavy metals content
- Thickness: 0.9 to 1.2mil (22.5 to 30μm)
- Hydration Required Before Use: 30 seconds for small-volume samples
- 30mL cassette has built-in air chamber for flotation
Kits contain cassettes plus an equal number of syringes with 18-gauge needles and single-cassette float buoys
|Slide-A-Lyzer Dialysis Cassettes, 10K MWCO, 3mL|
|3mL cassettes; 10 cassettes|
|Cellulose membrane framed in inert plastic|
|10 samples, each 0.5 to 3mL|