Labconco™ Purifier Axiom Class II Type C1 Biosafety Cabinet

Description

• Requires supporting base if included stand option is not selected
• Intrinsically-safe negative pressure design includes:
  • Dual Electronically Commutated Motors (ECM)
  • Constant Airflow Profile™ (CAP) Technology airflow monitoring system
  • Active Protection Protocol operates the cabinet's exhaust blowers for up to five minutes preventing the flow of air into the laboratory in the event of exhaust system failure
  • BSC required Air-Wave™ Entry System at access opening to enhance containment
  • Contain-Air™ Negative Pressure Channel at top of sash to enhance containment
  • Two programmable working sash heights (8 in. and 10 in.)
  • 10° angled, fully-closing, 1/4 in. tempered safety glass sash with counterbalanced, anti-racking, easy-to-lift mechanism
  • Curved waterfall design stainless steel inlet grille with Reserve-Air™ Secondary Airflow Slots
  • 22.6 in. (58 cm) maximum sash opening height and 27.0 in. (69 cm) viewing height Chem-Zone™ work surface with dedicated direct exhaust for use with hazardous vapors or radionuclides
  • Leak-tight interior with removable, type 304 stainless steel 3-piece work surface (dished Chem-Zone in center and two flat sides) with lift out knobs and clearly delineated working area
  • Nominal inflow velocity of 105 feet per minute (fpm) (0.53 m/sec)
  • Nominal downflow velocity of 65 fpm (0.33 m/sec) for 4 ft. models and 55 fpm (0.28 m/sec) for 6 ft. models
• Touchpad on right-hand side post controls blower, light(s), timer, electrical receptacles, audible alarm mute and menu selection
• Omni-Flex™ two mode design (Type A and B mode)
  • Low static pressure and volumetric rate exhaust requirements when in Type B mode
  • Night-Smart™ System for idling the blower when the sash is fully closed (while in Type A mode only)
• MyLogic™ Operating System and interior-mounted, line-of-sight, full color, easy-to-understand LCD information center with:
  • Smart-Start™ System for start up and shut down operations
  • Filter Life Remaining bar graph for each HEPA filter
  • Status line for alarm conditions and alerts to warn when filter life diminishes to 20% and 0%
  • Bright, 90-150 ft. candle, glare-free LED lighting located outside the contaminated work area
  • Interval/elapsed timer for experiment monitoring, LED light or UV light control (on models with UV light)
  • Electronic security lock (optional activation) that requires access code to operate the cabinet